Name | Data Type | Default Value | Qualifiers |
Name | Data Type | Value |
AutoSense | boolean | |
Deprecated | string | CIM_NetworkPort.AutoSense |
Description | string | Note: The use of this method has been deprecated.
Deprecated description: A Boolean that indicates whether the NetworkAdapter is capable of automatically determining the speed or other communications characteristics of the attached network media. |
FullDuplex | boolean | |
Deprecated | string | CIM_NetworkPort.FullDuplex |
Description | string | Note: The use of this method has been deprecated.
Deprecated description: A Boolean that indicates that the Adapter is operating in full duplex mode. |
MaxSpeed | uint64 | |
Deprecated | string | CIM_NetworkPort.MaxSpeed |
Description | string | Note: The use of this method has been deprecated.
Deprecated description: The maximum speed, in Bits per Second, for the Network Adapter. |
PUnit | string | bit / second |
Units | string | Bits per Second |
OctetsReceived | uint64 | |
Counter | boolean | true |
Deprecated | string | CIM_NetworkPortStatistics.BytesReceived |
Description | string | Note: The use of OctetsReceived is deprecated. The replacement is CIM_NetworkPortStatistics.BytesReceived. |
MappingStrings | string | MIB.IETF|RFC1213-MIB.ifInOctets, MIF.DMTF|Network Adapter 802 Port|001.9 |
OctetsTransmitted | uint64 | |
Counter | boolean | true |
Deprecated | string | CIM_NetworkPortStatistics.BytesTransmitted |
Description | string | Note: The use of this method has been deprecated. The replacement is CIM_NetworkPortStatistics.BytesTransmitted. |
MappingStrings | string | MIB.IETF|RFC1213-MIB.ifOutOctets, MIF.DMTF|Network Adapter 802 Port|001.7 |
PermanentAddress | string | |
Deprecated | string | CIM_NetworkPort.PermanentAddress |
Description | string | Note: The use of this method has been deprecated.
Deprecated description: PermanentAddress defines the network address that is hardcoded into an adapter. This 'hardcoded' address might be changed through a firmware upgrade or software configuration. If so, this field should be updated when the change is made. PermanentAddress should be left blank if no 'hardcoded' address exists for the NetworkAdapter. |
MappingStrings | string | MIF.DMTF|Network Adapter 802 Port|001.2 |
MaxLen | uint32 | 64 |
Speed | uint64 | |
Deprecated | string | CIM_NetworkPort.Speed |
Description | string | Note: The use of this method has been deprecated.
Deprecated description: An estimate of the current bandwidth in Bits per Second. For Adapters that vary in bandwidth or for those where no accurate estimation can be made, this property should contain the nominal bandwidth. |
MappingStrings | string | MIB.IETF|RFC1213-MIB.ifSpeed, MIF.DMTF|Network Adapter 802 Port|001.5 |
PUnit | string | bit / second |
Units | string | Bits per Second |
NetworkAddresses | string[] | |
ArrayType | string | Indexed |
Deprecated | string | CIM_NetworkPort.NetworkAddresses |
Description | string | Note: The use of this method has been deprecated.
Deprecated description: An array of strings that indicates the network addresses for an adapter. |
MappingStrings | string | MIF.DMTF|Network Adapter 802 Port|001.3 |
MaxLen | uint32 | 64 |