Class CIM_StorageCapabilities
extends CIM_Capabilities

A subclass of Capabilities that defines the Capabilities of a StorageService or StoragePool. For example, an instance of StorageCapabilities could be associated with either a StorageConfigurationService or StoragePool by using ElementCapabilities.

Table of Contents
Hierarchy
Direct Known Subclasses
Class Qualifiers
Class Properties
Class Methods

Class Hierarchy

CIM_ManagedElement
|
+--CIM_Capabilities
|
+--CIM_StorageCapabilities

Direct Known Subclasses

CIM_StorageTierCapabilities

Class Qualifiers

Name	Data Type	Value
Description	string	A subclass of Capabilities that defines the Capabilities of a StorageService or StoragePool. For example, an instance of StorageCapabilities could be associated with either a StorageConfigurationService or StoragePool by using ElementCapabilities.
UMLPackagePath	string	CIM::Device::StorageServices
Version	string	2.32.0

Class Properties

Local Class Properties

Name	Data Type	Default Value	Qualifiers
Name	Data Type	Default Value	Name	Data Type	Value
DataRedundancyDefault	uint16
			Description	string	DataRedundancyDefault describes the default number of complete copies of data that can be maintained. Examples would be RAID 5 where 1 copy is maintained and RAID 1 where 2 or more copies are maintained. Possible values are 1 to n. The bounds for the redundancy (max and min) are defined by DataRedundancyMax and DataRedundancyMin.
			MinValue	sint64	1
			ModelCorrespondence	string	CIM_StorageCapabilities.DataRedundancyMax, CIM_StorageCapabilities.DataRedundancyMin
DataRedundancyMax	uint16
			Description	string	DataRedundancyMax describes the maximum number of complete copies of data that can be maintained. Examples would be RAID 5 (where 1 copy is maintained) and RAID 1 (where 2 or more copies are maintained). Possible values are 1 to n. The default redundancy is specified using DataRedundancyDefault, while the minimum is defined by DataRedundancyMin.
			MinValue	sint64	1
			ModelCorrespondence	string	CIM_StorageCapabilities.DataRedundancyMin, CIM_StorageCapabilities.DataRedundancyDefault
DataRedundancyMin	uint16
			Description	string	DataRedundancyMin describes the minimum number of complete copies of data that can be maintained. Examples would be RAID 5 where 1 copy is maintained and RAID 1 where 2 or more copies are maintained). Possible values are 1 to n. The default redundancy is specified using DataRedundancyDefault, while the maximum is defined by DataRedundancyMax.
			MinValue	sint64	1
			ModelCorrespondence	string	CIM_StorageCapabilities.DataRedundancyMax, CIM_StorageCapabilities.DataRedundancyDefault
DeltaReservationDefault	uint16
			Description	string	Delta reservation is a number between 1 (1%) and a 100 (100%) that specifies how much space should be reserved by default in a replica for caching changes. For a complete copy this would be 100%, but it can be lower in some implementations. This parameter sets the default value, while DeletaReservationMax and DeltReservationMin set the upper and lower bounds.
			MaxValue	sint64	100
			MinValue	sint64	0
			ModelCorrespondence	string	CIM_StorageCapabilities.DeltaReservationMax, CIM_StorageCapabilities.DeltaReservationMin
			PUnit	string	percent
			Units	string	Percentage
DeltaReservationMax	uint16
			Description	string	DeltaReservatioMax is a number between 1 (1%) and a 100 (100%) that specifies the maximum amount of space reserved in a replica for caching changes. For a complete copy this would be 100%, but it can be lower in some implementations. This parameter sets the upper limit, while DeltaReservationMin sets the lower limit.
			MaxValue	sint64	100
			MinValue	sint64	0
			ModelCorrespondence	string	CIM_StorageCapabilities.DeltaReservationMin, CIM_StorageCapabilities.DeltaReservationDefault
			PUnit	string	percent
			Units	string	Percentage
DeltaReservationMin	uint16
			Description	string	DeltaReservationMin is a number between 1 (1%) and a 100 (100%) that specifies the minimum amount of space that should be reserved in a replica for caching changes. For a complete copy this would be 100%, but it can be lower in some implementations. This parameter sets the lower limit, while DeltaReservationMax sets the upper limit.
			MaxValue	sint64	100
			MinValue	sint64	0
			ModelCorrespondence	string	CIM_StorageCapabilities.DeltaReservationMax, CIM_StorageCapabilities.DeltaReservationDefault
			PUnit	string	percent
			Units	string	Percentage
ElementType	uint16
			Description	string	Enumeration indicating the type of element to which this StorageCapabilities applies.
			ValueMap	string	0, 1, 2, 3, 4, 5, 6, 7, 8
			Values	string	Unknown, Reserved, Any Type, StorageVolume, StorageExtent, StoragePool, StorageConfigurationService, LogicalDisk, StorageTier
Encryption	uint16
			Description	string	This property reflects support of the encryption feature implemented by some disk drives.
			Experimental	boolean	true
			ValueMap	string	0, 1, 2
			Values	string	Unknown, Not Supported, Supported
ExtentStripeLengthDefault	uint16
			Description	string	Extent Stripe Length describes the number of underlying StorageExtents across which data is striped in the common striping-based storage organizations. This is also known as the number of 'members' or 'columns'. A NULL value for ExtentStripeLengthDefault indicates that the system does not support configuration of storage by specifying Stripe Length. If Extent Stripe Length is supported, and this Capabilities instance is associated with a pool that was created with a range of QOS then ExtentStripeLengthDefault represents the default value. Other available values(such as min, max, and discrete values) can be determined by using the 'GetSupportedStripeLengths' and 'GetSupportedStripeLengthRange' methods. If Extent Stripe Length is supported and the pool was created with a single specific QOS, representing a Raid group, set, or rank, then this property represents the current/fixed value for the pool, and Extent Stripe Length is not supported in subsequent creation of elements from this pool. Consequently, the 'GetSupportedStripeLength' methods cannot be used, and in a StorageSetting instance used as a goal when creating or modifying a child element of the pool, ExtentStripeLengthGoal, ExtentStripeLengthMin, and ExtentStripeLengthMax MUST be set to NULL.
			MinValue	sint64	1
NoSinglePointOfFailure	boolean
			Description	string	Indicates whether or not the associated element supports no single point of failure. Values are: FALSE = does not support no single point of failure, and TRUE = supports no single point of failure.
			ModelCorrespondence	string	CIM_StorageCapabilities.NoSinglePointOfFailureDefault
NoSinglePointOfFailureDefault	boolean
			Description	string	Indicates the default value for the NoSinglePointOfFailure property.
			ModelCorrespondence	string	CIM_StorageCapabilities.NoSinglePointOfFailure
PackageRedundancyDefault	uint16
			Description	string	PackageRedundancyDefault describes the default number of redundant packages that will be used. For example, in the storage domain, package redundancy describes how many disk spindles can fail without data loss including, at most, one spare. An example would be RAID5 with a spare disk which would have a PackageRedundancy of 2. Possible values are 0 to n. The bounds for redundancy are specified using the properties, PackageRedundancyMax and PackageRedundancyMin.
			ModelCorrespondence	string	CIM_StorageCapabilities.PackageRedundancyMin, CIM_StorageCapabilities.PackageRedundancyMax
PackageRedundancyMax	uint16
			Description	string	PackageRedundancyMax describes the maximum number of redundant packages that can be used. For example, in the storage domain, package redundancy describes how many disk spindles can fail without data loss including, at most, one spare. An example would be RAID5 with a spare disk which would have a PackageRedundancy of 2. Possible values are 0 to n. The default redundancy is specified using PackageRedundancyDefault, while the maximum is defined by PackageRedundancyMax.
			ModelCorrespondence	string	CIM_StorageCapabilities.PackageRedundancyMin, CIM_StorageCapabilities.PackageRedundancyDefault
PackageRedundancyMin	uint16
			Description	string	PackageRedundancyMin describes the minimum number of redundant packages that can be used. For example, in the storage domain, package redundancy describes how many disk spindles can fail without data loss including, at most, one spare. An example would be RAID5 with a spare disk which would have a PackageRedundancy of 2. Possible values are 0 to n. The default redundancy is specified using PackageRedundancyDefault, while the minimum is defined by PackageRedundancyMin.
			ModelCorrespondence	string	CIM_StorageCapabilities.PackageRedundancyMax, CIM_StorageCapabilities.PackageRedundancyDefault
ParityLayoutDefault	uint16
			Description	string	ParityLayout specifies whether a parity-based storage organization is using rotated or non-rotated parity. If this capabilities instance is associated with a pool that was created with a range of QOS then ParityLayoutDefault represents the default value. Other available values can be determined by using the 'GetSupportedParityLayouts' method. If the pool was created with a single specific QOS, representing a Raid group, set, or rank, then this property represents the current/fixed value for the pool, and ParityLayout is not supported in subsequent creation of elements from this pool. Consequently, the 'GetSupportedParityLayouts' method cannot be used, and the ParityLayoutGoal property in StorageSetting instances used in child element operations on this pool MUST be set to NULL. A NULL value for ParityLayoutDefault indicates that the system does not support configuration of storage by specifying ParityLayout.
			ValueMap	string	2, 3
			Values	string	Non-Rotated Parity, Rotated Parity
UserDataStripeDepthDefault	uint64
			Description	string	User Data Stripe Depth describes the number of bytes forming a strip in common striping-based storage organizations. The strip is defined as the size of the portion of a stripe that lies on one extent. Thus, ExtentStripeLength * UserDataStripeDepth will yield the size of one stripe of user data. A NULL value for UserDataStripeDepthDefault indicates that the system does not support configuration of storage by specifying Stripe Depth. If User Data Stripe Depth is supported, and this Capabilities instance is associated with a pool that was created with a range of QOS then UserDataStripeDepthDefault represents the default value. Other available values(such as min, max, and discrete values) can be determined by using the 'GetSupportedStripeDepths' and 'GetSupportedStripeDepthRange' methods. If User Data Stripe Depth is supported and the pool was created with a single specific QOS, representing a Raid group, set, or rank, then this property represents the current/fixed value for the pool, and User Data Stripe Depth is not supported in subsequent creation of elements from this pool. Consequently, the 'GetSupportedStripeDepth' methods cannot be used, and in a StorageSetting instance used as a goal when creating or modifying a child element of the pool, UserDataStripeDepthGoal, UserDataStripeDepthMin, and UserDataStripeDepthMax MUST be set to NULL.
			MinValue	sint64	1
			PUnit	string	byte
			Units	string	Bytes
AvailableDiskType	uint16[]
			Description	string	Enumeration indicating the type of DiskDrives which may be available.
			Experimental	boolean	true
			ValueMap	string	0, 1, 2, 3, 4
			Values	string	Unknown, Other, Hard Disk Drive, Solid State Drive, Hybrid
AvailableFormFactorType	uint16[]
			Description	string	Enumeration indicating the types of disk form factors which may be available.
			Experimental	boolean	true
			ValueMap	string	0, 1, 2, 3, 4, 5, 6
			Values	string	Unknown, Other, Not Reported, 5.25 inch, 3.5 inch, 2.5 inch, 1.8 inch
AvailableInterconnectSpeed	uint64[]
			Description	string	The speed of disk interfaces which are be available. Values are in bits/second.
			Experimental	boolean	true
			PUnit	string	bit / second
AvailableInterconnectType	uint16[]
			Description	string	Enumeration indicating the type of disk interfaces which may be available.
			Experimental	boolean	true
			ValueMap	string	0, 1, 2, 3, 4, 5, 6
			Values	string	Unknown, other, SAS, SATA, SAS/SATA, FC, SOP
AvailableRPM	uint32[]
			Description	string	The rotational speed of disk media which are be available. Values are in revolutions per minute. SSD devices shall report 0.
			Experimental	boolean	true
			PUnit	string	revolution / minute
SupportedCompressionRates	uint16[]
			Description	string	The SupportedCompressionRates identifies the compression rates that are supported by the implementation, including "None". If "None" is specified, then no other rate may be identified.
			Experimental	boolean	true
			ValueMap	string	1, 2, 3, 4, 5, .., 32768..65535
			Values	string	None, High, Medium, Low, DMTF Reserved, Implementation Decides, Vendor Specific
SupportedDataOrganizations	uint16[]
			Description	string	Types of volume data organizations supported.
			Experimental	boolean	true
			ValueMap	string	0, 1, 2, 3, 4
			Values	string	Other, Unknown, Fixed Block, Variable Block, Count Key Data

Inherited Properties

Name	Data Type	Class Origin
Caption	string	CIM_ManagedElement
Description	string	CIM_ManagedElement
ElementName	string	CIM_Capabilities
Generation	uint64	CIM_ManagedElement
InstanceID	string	CIM_Capabilities

Class Methods

Local Class Methods

CreateSetting (uint32)

Method Qualifiers (CreateSetting)

Name	Data Type	Value
Description	string	Method to create and populate a StorageSetting instance from a StorageCapability instance. This removes the need to populate default settings and other settings in the context of each StorageCapabilities (which could be numerous). If the underlying instrumentation supports the StorageSettingWithHints subclass, then an instance of that class will be created instead.
ValueMap	string	0, 1, 2, 3, 4, 5, .., 32768..65535
Values	string	Success, Not Supported, Unspecified Error, Timeout, Failed, Invalid Parameter, DMTF Reserved, Vendor Specific

Method Parameters (CreateSetting)

Name	Type	Qualifiers
Name	Type	Name	Data Type	Value
SettingType	uint16
		Description	string	If 'Default' is passed for the CreateDefault parameter, the Max, Goal, and Min setting attributes are set to the Default values of the parent StorageCapabilities when the instance is created. If set to 'Goal' the new StorageSetting attributes are set to the related attributes of the parent StorageCapabilities, e.g. Min to Min, Goal to Default, and Max to Max. This method maybe deprecated in lieu of intrinsics once limitations in the CIM Operations are addressed.
		IN	boolean	true
		ValueMap	string	2, 3
		Values	string	Default, Goal
NewSetting	REF CIM_StorageSetting
		Description	string	Reference to the created StorageSetting instance.
		IN	boolean	false
		OUT	boolean	true

GetSupportedStripeLengths (uint32)

Method Qualifiers (GetSupportedStripeLengths)

Name	Data Type	Value
Description	string	For systems that support discrete ExtentStripeLengths for volume or pool creation, this method can be used to retrieve a list of supported values. Note that different implementations may support either the GetSupportedStripeLengths or the GetSupportedStripeLengthRange method. Also note that the advertised sizes may change after the call due to requests from other clients. If the system only supports a range of sizes, then the return value will be set to 3.
Experimental	boolean	true
ValueMap	string	0, 1, 2, 3
Values	string	Method completed OK, Method not supported, Choices not available for this Capability, Use GetSupportedStripeLengthRange instead

Method Parameters (GetSupportedStripeLengths)

Name	Type	Qualifiers
Name	Type	Name	Data Type	Value
StripeLengths	uint16[]
		ArrayType	string	Indexed
		Description	string	List of supported ExtentStripeLengths for a Volume/Pool creation or modification.
		IN	boolean	false
		OUT	boolean	true

GetSupportedStripeLengthRange (uint32)

Method Qualifiers (GetSupportedStripeLengthRange)

Name	Data Type	Value
Description	string	For systems that support a range of ExtentStripeLengths for volume or pool creation, this method can be used to retrieve the supported range. Note that different implementations may support either the GetSupportedExtentLengths or the GetSupportedExtentLengthRange method. Also note that the advertised sizes may change after the call due to requests from other clients. If the system only supports discrete values, then the return value will be set to 3.
Experimental	boolean	true
ValueMap	string	0, 1, 2, 3
Values	string	Method completed OK, Method not supported, Choices not available for this Capability, Use GetSupportedStripeLengths instead

Method Parameters (GetSupportedStripeLengthRange)

Name	Type	Qualifiers
Name	Type	Name	Data Type	Value
MaximumStripeLength	uint16
		Description	string	The maximum ExtentStripeLength for a volume/pool in bytes.
		IN	boolean	false
		OUT	boolean	true
MinimumStripeLength	uint16
		Description	string	The minimum ExtentStripeDepth for a volume/pool in bytes.
		IN	boolean	false
		OUT	boolean	true
StripeLengthDivisor	uint32
		Description	string	A volume/pool ExtentStripeLength must be a multiple of this value which is specified in bytes.
		IN	boolean	false
		OUT	boolean	true

GetSupportedParityLayouts (uint32)

Method Qualifiers (GetSupportedParityLayouts)

Name	Data Type	Value
Description	string	For systems that support Parity-based storage organizations for volume or pool creation, this method can be used to the supported parity layouts.
ValueMap	string	0, 1, 2
Values	string	Method completed OK, Method not supported, Choice not aavailable for this capability

Method Parameters (GetSupportedParityLayouts)

Name	Type	Qualifiers
Name	Type	Name	Data Type	Value
ParityLayout	uint16[]
		ArrayType	string	Indexed
		Description	string	List of supported Parity for a Volume/Pool creation or modification.
		IN	boolean	false
		OUT	boolean	true
		ValueMap	string	2, 3
		Values	string	Non-Rotated Parity, Rotated Parity

GetSupportedStripeDepths (uint32)

Method Qualifiers (GetSupportedStripeDepths)

Name	Data Type	Value
Description	string	For systems that support discrete UserDataStripeDepths for volume or pool creation, this method can be used to retrieve a list of supported values. Note that different implementations may support either the GetSupportedStripeDepths or the GetSupportedStripeDepthRange method. If the system only supports a range of sizes, then the return value will be set to 2.
Experimental	boolean	true
ValueMap	string	0, 1, 2
Values	string	Method completed OK, Method not supported, Use GetSupportedStripeDepthRange instead

Method Parameters (GetSupportedStripeDepths)

Name	Type	Qualifiers
Name	Type	Name	Data Type	Value
StripeDepths	uint64[]
		ArrayType	string	Indexed
		Description	string	List of supported UserDataStripeDepths for a Volume/Pool creation or modification.
		IN	boolean	false
		OUT	boolean	true
		PUnit	string	byte
		Units	string	Bytes

GetSupportedStripeDepthRange (uint32)

Method Qualifiers (GetSupportedStripeDepthRange)

Name	Data Type	Value
Description	string	For systems that support a range of UserDataStripeDepths for volume or pool creation, this method can be used to retrieve the supported range. Note that different implementations may support either the GetSupportedStripeDepths or the GetSupportedStripeDepthRange method. If the system only supports discrete values, then the return value will be set to 2.
Experimental	boolean	true
ValueMap	string	0, 1, 2
Values	string	Method completed OK, Method not supported, Use GetSupportedStripeDepths instead

Method Parameters (GetSupportedStripeDepthRange)

Name	Type	Qualifiers
Name	Type	Name	Data Type	Value
MaximumStripeDepth	uint64
		Description	string	The maximum UserDataStripeDepth for a volume/pool in bytes.
		IN	boolean	false
		OUT	boolean	true
		PUnit	string	byte
		Units	string	Bytes
MinimumStripeDepth	uint64
		Description	string	The minimum UserDataStripeDepth for a volume/pool in bytes.
		IN	boolean	false
		OUT	boolean	true
		PUnit	string	byte
		Units	string	Bytes
StripeDepthDivisor	uint64
		Description	string	A volume/pool UserDataStripeDepth must be a multiple of this value which is specified in bytes.
		IN	boolean	false
		OUT	boolean	true
		PUnit	string	byte
		Units	string	Bytes

Inherited Class Methods

Name	Return Type	Class Origin
CreateGoalSettings	uint16	CIM_Capabilities

Class CIM_StorageCapabilitiesextends CIM_Capabilities

Table of Contents Hierarchy Direct Known Subclasses Class Qualifiers Class Properties Class Methods