| Name | Data Type | Default Value | Qualifiers |
| Name | Data Type | Value |
| MaxDataSize | uint32 | |
| Description | string | The maximum size of the INFO (non-MAC) field that will be received or transmitted. |
| MappingStrings | string | MIB.IETF|BRIDGE-MIB.dot1dTpPortMaxInfo |
| RingOpenStatus | uint16 | |
| Description | string | This property indicates the success, or the reason for failure, of the most recent attempt by the station to enter the ring. |
| MappingStrings | string | MIB.IETF|IEEE 802.5 Token Ring MIB.dot5RingOpenStatus |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 |
| Values | string | No Open Attempted, Bad Parameter, Lobe Failed, Signal Loss, Insertion Timeout, Ring Failed, Beaconing, Duplicate MAC, Request Failed, Remove Received, Last Open Successful |
| RingSpeed | uint16 | |
| Description | string | The bandwidth of the ring. |
| MappingStrings | string | MIB.IETF|IEEE 802.5 Token Ring MIB.dot5RingSpeed |
| ValueMap | string | 0, 1, 2, 3, 4 |
| Values | string | Unknown, Other, One Megabit, Four Megabit, Sixteen Megabit |
| RingState | uint16 | |
| Description | string | The current Device state with respect to entering or leaving the ring. |
| MappingStrings | string | MIB.IETF|IEEE 802.5 Token Ring MIB.dot5RingState |
| ValueMap | string | 0, 1, 2, 3, 4, 5 |
| Values | string | Opened, Closed, Opening, Closing, Open Failure, Ring Failure |
| RingStatus | uint32 | |
| Description | string | The current status that can be used to diagnose fluctuating problems that can occur on token rings, after a station has successfully been added to the ring. Before an open is completed, this object contains the value that indicates "no status" (131072). (The RingState and RingOpenStatus properties are also provided for debugging problems when the station cannot even enter the ring.) The value of the property is a sum of values, one for each currently applicable condition. The following values are defined for various conditions:
0 = No Problems Detected, 32 = Ring Recovery, 64 = Single Station, 256 = Remove Received, 512 = Reserved, 1024 = Auto-Removal Error, 2048 = Lobe Wire Fault, 4096 = Transmit Beacon, 8192 = Soft Error, 16384 = Hard Error, 32768 = Signal Loss, 131072 = No Status, Open Not Completed. |
| MappingStrings | string | MIB.IETF|IEEE 802.5 Token Ring MIB.dot5RingStatus |
| Capabilities | uint16[] | |
| ArrayType | string | Indexed |
| Description | string | Capabilities of the TokenRingPort. For example, the Device might support AlertOnLan, WakeOnLan, Load Balancing, or Failover. If failover or load balancing capabilities are listed, a SpareGroup (failover) or ExtraCapacityGroup (load balancing) should also be defined to completely describe the capability. |
| ModelCorrespondence | string | CIM_TokenRingPort.CapabilityDescriptions |
| ValueMap | string | 0, 1, 2, 3, 4, 5 |
| Values | string | Unknown, Other, AlertOnLan, WakeOnLan, FailOver, LoadBalancing |
| CapabilityDescriptions | string[] | |
| ArrayType | string | Indexed |
| Description | string | An array of free-form strings that provides more detailed explanations for any of the TokenRingAPort features that are indicated in the Capabilities array. Note, each entry of this array is related to the entry in the Capabilities array that is located at the same index. |
| ModelCorrespondence | string | CIM_TokenRingPort.Capabilities |
| EnabledCapabilities | uint16[] | |
| ArrayType | string | Indexed |
| Description | string | Specifies which of the capabilities from the "Capabilities" property are currently enabled. |
| ModelCorrespondence | string | CIM_TokenRingPort.Capabilities, CIM_TokenRingPort.OtherEnabledCapabilities |
| ValueMap | string | 0, 1, 2, 3, 4, 5 |
| Values | string | Unknown, Other, AlertOnLan, WakeOnLan, FailOver, LoadBalancing |
| NetworkAddresses | string[] | |
| Description | string | Token Ring/802.5 MAC addresses formatted as twelve hexadecimal digits (for example,"010203040506"), with each pair representing one of the six octets of the MAC address in "canonical" bit order. (Therefore, the Group address bit is found in the low order bit of the first character of the string.) |
| MappingStrings | string | MIF.DMTF|Network Adapter 802 Port|001.3 |
| MaxLen | uint32 | 64 |
| Override | string | NetworkAddresses |
| OtherEnabledCapabilities | string[] | |
| ArrayType | string | Indexed |
| Description | string | An array of free-form strings that provides more detailed explanations for any of the enabled capabilities that are specified as 'Other'. |
| ModelCorrespondence | string | CIM_TokenRingPort.EnabledCapabilities |