| Name | Data Type | Default Value | Qualifiers |
| Name | Data Type | Value |
| BatteryStatus | uint16 | |
| Description | string | Description of the charge status of the Battery. Values such as "Fully Charged" (value=3) or "Partially Charged" (value=11) can be specified. The value, 10, is not valid in the CIM Schema because in DMI it represents that no battery is installed. In this case, this object should not be instantiated. The valuemaps: 6(Charging), 7(Charging and High), 8(Charging and Low), and 9(Charing and Critical) has been deprecated in lieu of the ChargingStatus property. 10(Undefined) has been deprecated in lieu of 2(Unknown). |
| MappingStrings | string | MIF.DMTF|Portable Battery|003.14 |
| ValueMap | string | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, .., 32768..65535 |
| Values | string | Other, Unknown, Fully Charged, Low, Critical, Charging, Charging and High, Charging and Low, Charging and Critical, Undefined, Partially Charged, Learning, Overcharged, DMTF Reserved, Vendor Specific |
| ChargingStatus | uint16 | |
| Description | string | ChargingStatus indicates whether the battery is charging. Charging - the battery is charging. Discharging - the battery is discharging. Idle - the batter is neither charging nor discharging. |
| ValueMap | string | 0, 2, 3, 4, .., 32768..65535 |
| Values | string | Unknown, Charging, Discharging, Idle, DMTF Reserved, Vendor Specified |
| Chemistry | uint16 | |
| Description | string | An enumeration that describes the chemistry of the Battery. |
| MappingStrings | string | MIF.DMTF|Portable Battery|003.7 |
| ValueMap | string | 1, 2, 3, 4, 5, 6, 7, 8, .., 32768..65535 |
| Values | string | Other, Unknown, Lead Acid, Nickel Cadmium, Nickel Metal Hydride, Lithium-ion, Zinc air, Lithium Polymer, DMTF Reserved, Vendor Specified |
| DesignCapacity | uint32 | |
| Description | string | The design capacity of the battery in mWatt-hours. If this property is not supported, enter 0. |
| MappingStrings | string | MIF.DMTF|Portable Battery|003.8 |
| PUnit | string | watt * hour * 10^-3 |
| Units | string | MilliWattHours |
| DesignVoltage | uint64 | |
| Description | string | The design voltage of the battery in mVolts. If this attribute is not supported, enter 0. |
| MappingStrings | string | MIF.DMTF|Portable Battery|003.9 |
| PUnit | string | volt * 10^-3 |
| Units | string | MilliVolts |
| EstimatedChargeRemaining | uint16 | |
| Description | string | An estimate of the percentage of full charge remaining. |
| Gauge | boolean | true |
| PUnit | string | percent |
| Units | string | Percent |
| EstimatedRunTime | uint32 | |
| Description | string | EstimatedRunTime is an estimate in minutes of the time that battery charge depletion will occur under the present load conditions if the utility power is off, or is lost and remains off, or a Laptop is disconnected from a power source. |
| MappingStrings | string | MIF.DMTF|Portable Battery|003.15 |
| PUnit | string | minute |
| Units | string | Minutes |
| ExpectedLife | uint32 | |
| Description | string | Indicates the expected lifetime of the Battery in minutes, assuming that the Battery is fully charged. This property represents the total expected life of the Battery, not its current remaining life, which is indicated by the EstimatedRunTime property. |
| PUnit | string | minute |
| Units | string | Minutes |
| FullChargeCapacity | uint32 | |
| Description | string | The full charge capacity of the battery in mWatt-hours. Comparison of this value to the Battery DesignCapacity determines when the Battery requires replacement. The end of life of a Battery is typically when the FullCharge Capacity falls below 80% of the DesignCapacity. If this property is not supported, enter 0. |
| MappingStrings | string | MIF.DMTF|Portable Battery|003.11 |
| PUnit | string | watt * hour * 10^-3 |
| Units | string | MilliWattHours |
| HealthPercent | uint8 | |
| Description | string | An estimate of the percentage of the overall battery health. It indicates how much the battery has deteriorated over time. It can take values 0 to 100; 255 if it is unknown. |
| PUnit | string | percent |
| Units | string | Percentage |
| MaxRechargeCount | uint32 | |
| Description | string | The maximum number of times the Battery can be recharged. |
| MaxRechargeTime | uint32 | |
| Description | string | MaxRechargeTime indicates the maximum time, in minutes, to fully charge the Battery. This property represents the time to recharge a fully depleted Battery, not the current remaining charging time, which is indicated in the TimeToFullCharge property. |
| PUnit | string | minute |
| Units | string | Minutes |
| OtherChemistryDescription | string | |
| Description | string | The description of the battery chemistry when the Chemistry property has value 1 (Other). The property shall be implemented if the Chemistry property has value 1(Other). |
| RechargeCount | uint32 | |
| Description | string | The number of times the Battery has been recharged. |
| RemainingCapacity | uint32 | |
| Description | string | The Battery's remaining charge capacity in mWatt-hours. |
| PUnit | string | watt * hour * 10^-3 |
| Units | string | MilliWattHours |
| RemainingCapacityMaxError | uint8 | |
| Description | string | The maximum error (as a percentage) in the mWatt-hour data reported by RemainingCapacity property. |
| PUnit | string | percent |
| Units | string | Percentage |
| SmartBatteryVersion | string | |
| Description | string | The Smart Battery Data Specification version number that is supported by this Battery. If the Battery does not support this function, the value should be left blank. |
| MappingStrings | string | MIF.DMTF|Portable Battery|003.10 |
| MaxLen | uint32 | 64 |
| TimeOnBattery | uint32 | |
| Description | string | TimeOnBattery indicates the elapsed time in seconds since the ComputerSystem, UPS, or so on, last switched to battery power, or the time since the System or UPS was last restarted, whichever is less. Zero is returned if the Battery is 'on line'. |
| PUnit | string | second |
| Units | string | Seconds |
| TimeToFullCharge | uint32 | |
| Description | string | The remaining time in minutes to charge the battery fully at the current charging rate and usage. |
| MappingStrings | string | MIF.DMTF|Portable Battery|003.16 |
| PUnit | string | minute |
| Units | string | Minutes |