Class CIM_AutonomousSystem
extends CIM_AdminDomain

An Autonomous System (AS) is a fundamental concept in networking. An AS provides a structured view of routing by segregating the system that is using routing (e.g., the Internet, or an extranet) into a set of separately administered domains that each have their own independent routing policies. These domains are called autonomous systems. The classic definition of an AS, from RFC1771, is '...a set of routers under a single technical administration, using an interior gateway protocol and common metrics to route packets within the AS, and using an exterior gateway protocol to route packets to other ASs'. The RFC continues: 'Since this classic definition was developed, it has become common for a single AS to use several interior gateway protocols and sometimes several sets of metrics within an AS. The use of the term Autonomous System here stresses the fact that, even when multiple IGPs and metrics are used, the administration of an AS appears to other ASs to have a single coherent interior routing plan and presents a consistent picture of what destinations are reachable through it.'

Table of Contents
Hierarchy
Direct Known Subclasses
Class Qualifiers
Class Properties
Class Methods


Class Hierarchy

CIM_ManagedElement
   |
   +--CIM_ManagedSystemElement
   |
   +--CIM_LogicalElement
   |
   +--CIM_EnabledLogicalElement
   |
   +--CIM_System
   |
   +--CIM_AdminDomain
   |
   +--CIM_AutonomousSystem

Direct Known Subclasses

Class Qualifiers

NameData TypeValue
DescriptionstringAn Autonomous System (AS) is a fundamental concept in networking. An AS provides a structured view of routing by segregating the system that is using routing (e.g., the Internet, or an extranet) into a set of separately administered domains that each have their own independent routing policies. These domains are called autonomous systems. The classic definition of an AS, from RFC1771, is '...a set of routers under a single technical administration, using an interior gateway protocol and common metrics to route packets within the AS, and using an exterior gateway protocol to route packets to other ASs'. The RFC continues: 'Since this classic definition was developed, it has become common for a single AS to use several interior gateway protocols and sometimes several sets of metrics within an AS. The use of the term Autonomous System here stresses the fact that, even when multiple IGPs and metrics are used, the administration of an AS appears to other ASs to have a single coherent interior routing plan and presents a consistent picture of what destinations are reachable through it.'
UMLPackagePathstringCIM::Network::Systems
Versionstring2.6.0

Class Properties

Local Class Properties

NameData TypeDefault ValueQualifiers
NameData TypeValue
AggregationTypeuint16
DescriptionstringRoute aggregation refers to summarizing ranges of routes into one or more aggregate routes. This is done to minimize the number of routes in the global routing table. A potential drawback is that specific path information (e.g., the Path attribute value) is lost, which may lead to potential routing loops. There are a variety of ways to ensure that this does not happen. Note that BGP4 is required to do this. There are many ways to form aggregate routes. The following are the most popular: 'Aggregate only', where only the aggregate is advertised, and all of its more specific routes are suppressed; 'Aggregate Plus Specific Routes', where both the aggregate as well as its more specific routes are advertised (e.g., send the aggregate to the NAP, but send the more specific routes to providers); 'Aggregate Based on a Subset of Specific Routes', where the aggregate route is formed by looking at certain more specific routes and forming an aggregate on them, suppressing all others.
ValueMapstring0, 1, 2, 3, 4
ValuesstringUnknown, None, Aggregate Only, Aggregate And All Specific Routes, Aggregate Based on Subset of Specific Routes
ASNumberuint16
DescriptionstringAn ASNumber is an integer between 1 and 65535, with the range 64512 through 65535 reserved for private use. Every AS has a unique AS number, which is assigned to it by an Internet Registry or a provider. IANA assigns and administers AS numbers.
IsSingleHomedboolean
DescriptionstringIsSingleHomed is a boolean that, when its value is TRUE, indicates that this AS reaches networks outside of its domain through a single exit point.
IsTransitboolean
DescriptionstringIsTransit is a boolean that, when its value is TRUE, indicates that this AS will advertise routes that it learns from other ASs. A non-transit AS will only advertise its own routes.
RequireIGPSyncboolean
DescriptionstringRequireIGPSync is a boolean that, when its value is TRUE, indicates that this AS must obey the following rule: a router should not advertise destinations learned from internal neighbors to external destinations unless those destinations are also known via some internal gateway protocol. Otherwise, a router may receive traffic that cannot yet be routed. However, since this is a costly choice, it is common practice to allow this rule to be broken under certain carefully controlled circumstances.
RoutingUpdateSourceuint16
DescriptionstringRoutingUpdateSource defines how routing information is to be injected. Statically injected routes are maintained by the routing table and are independent of the status of the networks to which they refer. This is done simply by defining static routes in the routing table. Dynamically injected routes are of two types. Dynamic routes refer to distributing all of the IGP routes. Semi-dynamic routes define a set of specific IGP routes that will be injected.
ValueMapstring0, 1, 2, 3
ValuesstringUnknown, Static, Dynamic, Semi-Dynamic

Inherited Properties

NameData TypeClass Origin
CaptionstringCIM_ManagedElement
CommunicationStatusuint16CIM_ManagedSystemElement
CreationClassNamestringCIM_System
DescriptionstringCIM_ManagedElement
DetailedStatusuint16CIM_ManagedSystemElement
ElementNamestringCIM_ManagedElement
EnabledDefaultuint16CIM_EnabledLogicalElement
EnabledStateuint16CIM_EnabledLogicalElement
Generationuint64CIM_ManagedElement
HealthStateuint16CIM_ManagedSystemElement
InstallDatedatetimeCIM_ManagedSystemElement
InstanceIDstringCIM_ManagedElement
NamestringCIM_System
NameFormatstringCIM_AdminDomain
OperatingStatusuint16CIM_ManagedSystemElement
OtherEnabledStatestringCIM_EnabledLogicalElement
PrimaryOwnerContactstringCIM_System
PrimaryOwnerNamestringCIM_System
PrimaryStatusuint16CIM_ManagedSystemElement
RequestedStateuint16CIM_EnabledLogicalElement
StatusstringCIM_ManagedSystemElement
TimeOfLastStateChangedatetimeCIM_EnabledLogicalElement
TransitioningToStateuint16CIM_EnabledLogicalElement
AvailableRequestedStatesuint16[]CIM_EnabledLogicalElement
IdentifyingDescriptionsstring[]CIM_System
OperationalStatusuint16[]CIM_ManagedSystemElement
OtherIdentifyingInfostring[]CIM_System
Rolesstring[]CIM_System
StatusDescriptionsstring[]CIM_ManagedSystemElement

Class Methods

Inherited Class Methods

NameReturn TypeClass Origin
RequestStateChangeuint32CIM_EnabledLogicalElement