Class CIM_FibrePort
extends CIM_LogicalPort

Note: The use of the FibrePort class is deprecated because FibreChannel Adapter has been deprecated in lieu of FCPort and this class overlaps with FCPort. The new FCPort class should be used in lieu of both FibreChannelAdapter and FibrePort. Deprecated description: FibrePort describes the capabilities and management aspects of a Fibre Channel Port Device.

Table of Contents
Hierarchy
Direct Known Subclasses
Class Qualifiers
Class Properties
Class Methods


Class Hierarchy

CIM_ManagedElement
   |
   +--CIM_ManagedSystemElement
   |
   +--CIM_LogicalElement
   |
   +--CIM_EnabledLogicalElement
   |
   +--CIM_LogicalDevice
   |
   +--CIM_LogicalPort
   |
   +--CIM_FibrePort

Direct Known Subclasses

Class Qualifiers

NameData TypeValue
DeprecatedstringCIM_FCPort
DescriptionstringNote: The use of the FibrePort class is deprecated because FibreChannel Adapter has been deprecated in lieu of FCPort and this class overlaps with FCPort. The new FCPort class should be used in lieu of both FibreChannelAdapter and FibrePort. Deprecated description: FibrePort describes the capabilities and management aspects of a Fibre Channel Port Device.
UMLPackagePathstringCIM::Device::NetworkAdapter
Versionstring2.10.0

Class Properties

Local Class Properties

NameData TypeDefault ValueQualifiers
NameData TypeValue
AddressIdentifieruint32
DeprecatedstringCIM_FCPort.PermanentAddress
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: An address value that is used to identify the source (S_ID) or destination (D_ID) of a frame. The FC-SW standard includes a table of special address identifier values and their meanings. Consult the FC-SW documentation for additional information.
BypassedStateuint16
DeprecatedstringNo value
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: Indication of whether the Port is currently bypassed (value=2) or not (value=1). A value of 3 ("Forced Insert") describes that the Port is forced active, when it would otherwise be "Bypassed".
ValueMapstring0, 1, 2, 3
ValuesstringUnknown, Not Bypassed, Bypassed, Forced Insert
ConnectedMediauint16
DeprecatedstringNo value
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: The type of cabling as sensed by the Port. Not all Fibre Ports are capable of providing this information. In this case, a value of 0, "Unknown", will be returned. Also, when single or multi-mode fiber cabling cannot be distinguished, the more general value 4, "Fiber-optic" can be specified.
ValueMapstring0, 1, 2, 3, 4, 5, 6
ValuesstringUnknown, Other, No Media, Copper/Twinaxial, Fiber-optic, Fiber Single Mode, Fiber Multimode
CRCErrorsuint64
Counterbooleantrue
DeprecatedstringCIM_FCPortStatistics.CRCErrors
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: Number of times that the CRC in a frame does not match the CRC computed by the receiver.
CurrentPortTypeuint16
DeprecatedstringCIM_FCPort.PortType
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: The specific mode in which the Port is currently running. The value is one of the entries in the EnabledPortTypes array. The current port type or mode is dependent on the fibre technology. For example, in a public loop network, you might indicate a port type of "FL" (value=6) or "NL" (value=2).
ModelCorrespondencestringCIM_FibrePort.EnabledPortTypes, CIM_FibrePort.CurrentVersion
ValueMapstring0, 1, 2, 3, 4, 5, 6, 7
ValuesstringUnknown, N, NL-Private, NL-Public, E, F, FL, B
CurrentVersionstring
DeprecatedstringNo value
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: Version information for the CurrentPortType that is active.
ModelCorrespondencestringCIM_FibrePort.CurrentPortType
ElasticityBufferOverrunsuint64
Counterbooleantrue
DeprecatedstringNo value
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: The number of times that a fill word could not be deleted, when required. The Elasticity Buffer is defined in FC-AL. This event might cause data corruption and might indicate a configuration error or a device out of spec.
ElasticityBufferUnderrunsuint64
Counterbooleantrue
DeprecatedstringNo value
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: The number of times that a fill word could not be inserted, when required. The Elasticity Buffer is defined in FC-AL. This event might cause data corruption and might indicate a configuration error or that a device is out of spec.
FramesTooLonguint64
Counterbooleantrue
DeprecatedstringCIM_FCPortStatistics.FramesTooLong
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: The number of frames that were received that were longer than 2140 octets. The value of 2140 is calculated based on an assumption of 24 header bytes plus 4 CRC bytes and 2112 bytes of payload.
FramesTooShortuint64
Counterbooleantrue
DeprecatedstringCIM_FCPortStatistics.FramesTooShort
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: The number of frames that were received that were shorter than 28 octets. The value of 28 is calculated based on an assumption of 24 header bytes plus 4 CRC bytes. The count does not include SOF/EOF bytes that are not data.
InvalidTransmissionWordsuint64
Counterbooleantrue
DeprecatedstringCIM_FCPortStatistics.InvalidTransmissionWords
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: The number of transmission words that had an 8b10b code violation in one or more of its characters, had a K28.5 in its second, third, or fourth character positions, or was an ordered set that had an incorrect Beginning Running Disparity.
LossOfSignalCounteruint64
Counterbooleantrue
DeprecatedstringCIM_FCPortStatistics.LossOfSignalCounter
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: Number of times that the signal has been lost on the Port since the last reset of the Device.
LossOfSyncCounteruint64
Counterbooleantrue
DeprecatedstringCIM_FCPortStatistics.LossOfSyncCounter
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: Number of times that synchronization has been lost on the Port since the last reset of the Device. Synchronization is assumed lost after a timeout period that is identified by the Receiver TransmitterTimeout property.
ReceiverTransmitterTimeoutuint64
DeprecatedstringNo value
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: Timeout value in milliseconds that is used to determine when loss of synchronization has occurred. The typical default is 100 msec.
PUnitstringsecond * 10^-3
UnitsstringMilliseconds
AliasAddressesuint32[]
DeprecatedstringCIM_FCPort.NetworkAddresses
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: One or more address identifiers that can be recognized by the Port, in addition to its port-specific identifier. Multicast or hunt group addresses that are recognized by the Port would be identified in this array.
EnabledPortTypesuint16[]
DeprecatedstringNo value
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: The specific modes currently enabled for the Port. The values are equal to, or a subset of the values in the Supported PortTypes array.
ModelCorrespondencestringCIM_FibrePort.SupportedPortTypes, CIM_FibrePort.EnabledVersions
ValueMapstring0, 1, 2, 3, 4, 5, 6, 7
ValuesstringUnknown, N, NL-Private, NL-Public, E, F, FL, B
EnabledVersionsstring[]
ArrayTypestringIndexed
DeprecatedstringNo value
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: Version information for each of the EnabledPortTypes. A particular PortType (mode) might be listed multiple times in the EnabledPortTypes array in order to define multiple, unique version levels. Note, each entry of this array is related to the entry in EnabledPortTypes that is located at the same index.
ModelCorrespondencestringCIM_FibrePort.EnabledPortTypes
PortTypeVersionsstring[]
ArrayTypestringIndexed
DeprecatedstringNo value
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: Version information for each of the SupportedPortTypes. A particular PortType (mode) can be listed multiple times in the SupportedPortTypes array in order to define multiple, unique version levels. Note, each entry of this array is related to the entry in SupportedPortTypes that is located at the same index.
ModelCorrespondencestringCIM_FibrePort.SupportedPortTypes
SupportedPortTypesuint16[]
ArrayTypestringIndexed
DeprecatedstringNo value
DescriptionstringNote: The use of this method has been deprecated. Deprecated description: An array that indicates the modes in which the Port can operate. PortType values describe the role and behavior of the Fibre Channel entity: "N" = Node Port, "NL" = Node Port supporting FC arbitrated loop, "E" = Expansion Port connecting fabric elements (for example, FC switches), "F"=Fabric (element) Port, "FL"=Fabric (element) Port supporting FC arbitrated loop, and "B"=Bridge Port. PortTypes are defined in the ANSI X3 standards. A particular mode can be listed multiple times in the SupportedPortTypes array in order to define that multiple, unique version levels are supported. Version information is defined in the PortTypeVersions property. Note, each entry of the SupportedPortTypes array is related to the entry in PortTypeVersions that is located at the same index.
ModelCorrespondencestringCIM_FibrePort.PortTypeVersions
ValueMapstring0, 1, 2, 3, 4, 5, 6, 7
ValuesstringUnknown, N, NL-Private, NL-Public, E, F, FL, B

Inherited Properties

NameData TypeClass Origin
Availabilityuint16CIM_LogicalDevice
CaptionstringCIM_ManagedElement
CommunicationStatusuint16CIM_ManagedSystemElement
CreationClassNamestringCIM_LogicalDevice
DescriptionstringCIM_ManagedElement
DetailedStatusuint16CIM_ManagedSystemElement
DeviceIDstringCIM_LogicalDevice
ElementNamestringCIM_ManagedElement
EnabledDefaultuint16CIM_EnabledLogicalElement
EnabledStateuint16CIM_EnabledLogicalElement
ErrorClearedbooleanCIM_LogicalDevice
ErrorDescriptionstringCIM_LogicalDevice
Generationuint64CIM_ManagedElement
HealthStateuint16CIM_ManagedSystemElement
InstallDatedatetimeCIM_ManagedSystemElement
InstanceIDstringCIM_ManagedElement
LastErrorCodeuint32CIM_LogicalDevice
LocationIndicatoruint16CIM_LogicalDevice
MaxQuiesceTimeuint64CIM_LogicalDevice
MaxSpeeduint64CIM_LogicalPort
NamestringCIM_ManagedSystemElement
OperatingStatusuint16CIM_ManagedSystemElement
OtherEnabledStatestringCIM_EnabledLogicalElement
OtherPortTypestringCIM_LogicalPort
PortTypeuint16CIM_LogicalPort
PowerManagementSupportedbooleanCIM_LogicalDevice
PowerOnHoursuint64CIM_LogicalDevice
PrimaryStatusuint16CIM_ManagedSystemElement
RequestedSpeeduint64CIM_LogicalPort
RequestedStateuint16CIM_EnabledLogicalElement
Speeduint64CIM_LogicalPort
StatusstringCIM_ManagedSystemElement
StatusInfouint16CIM_LogicalDevice
SystemCreationClassNamestringCIM_LogicalDevice
SystemNamestringCIM_LogicalDevice
TimeOfLastStateChangedatetimeCIM_EnabledLogicalElement
TotalPowerOnHoursuint64CIM_LogicalDevice
TransitioningToStateuint16CIM_EnabledLogicalElement
UsageRestrictionuint16CIM_LogicalPort
AdditionalAvailabilityuint16[]CIM_LogicalDevice
AvailableRequestedStatesuint16[]CIM_EnabledLogicalElement
IdentifyingDescriptionsstring[]CIM_LogicalDevice
OperationalStatusuint16[]CIM_ManagedSystemElement
OtherIdentifyingInfostring[]CIM_LogicalDevice
PowerManagementCapabilitiesuint16[]CIM_LogicalDevice
StatusDescriptionsstring[]CIM_ManagedSystemElement

Class Methods

Inherited Class Methods

NameReturn TypeClass Origin
EnableDeviceuint32CIM_LogicalDevice
OnlineDeviceuint32CIM_LogicalDevice
QuiesceDeviceuint32CIM_LogicalDevice
RequestStateChangeuint32CIM_EnabledLogicalElement
Resetuint32CIM_LogicalDevice
RestorePropertiesuint32CIM_LogicalDevice
SavePropertiesuint32CIM_LogicalDevice
SetPowerStateuint32CIM_LogicalDevice