Class CIM_WiFiEndpointSettings
extends CIM_SettingData

CIM_WiFiEndpointSettings describes setting data that can be applied to an instance of CIM_WiFiEndpoint to enable it to associate to a particular Wi-Fi network.

Table of Contents
Hierarchy
Direct Known Subclasses
Class Qualifiers
Class Properties
Class Methods


Class Hierarchy

CIM_ManagedElement
   |
   +--CIM_SettingData
   |
   +--CIM_WiFiEndpointSettings

Direct Known Subclasses

Class Qualifiers

NameData TypeValue
DescriptionstringCIM_WiFiEndpointSettings describes setting data that can be applied to an instance of CIM_WiFiEndpoint to enable it to associate to a particular Wi-Fi network.
UMLPackagePathstringCIM::Network::Wireless
Versionstring2.22.0

Class Properties

Local Class Properties

NameData TypeDefault ValueQualifiers
NameData TypeValue
AuthenticationMethoduint16
DescriptionstringAuthenticationMethod shall specify the 802.11 authentication method used when the settings are applied. * Other (1): shall indicate that the desired authentication method is not specified in the list below. If AuthenticationMethod contains 1, OtherAuthenticationMethod should not be NULL and should not be empty. * Open System (2): shall indicate that the desired authentication method is Open System. AuthenticationMethod should contain 2 only if EncryptionMethod contains 2 ("WEP") or 5 ("None"). * Shared Key (3): shall indicate that the desired authentication method is Shared Key. AuthenticationMethod should contain 3 only if EncryptionMethod contains 2 ("WEP") or 5 ("None"). * WPA PSK (4): shall indicate that the desired authentication method is WPA (Wi-Fi Protected Access) PSK (Pre-Shared Key). AuthenticationMethod should contain 4 only if EncryptionMethod contains 3 ("TKIP") or 4 ("CCMP"). * WPA IEEE 802.1x (5): shall indicate that the desired authentication method is WPA (Wi-Fi Protected Access) IEEE 802.1x. AuthenticationMethod should contain 5 only if EncryptionMethod contains 3 ("TKIP") or 4 ("CCMP"). * WPA2 PSK (6): shall indicate that the desired authentication method is WPA2 (Wi-Fi Protected Access Version 2) PSK (Pre-Shared Key). AuthenticationMethod should containt 6 only if EncryptionMethod contains 3 ("TKIP") or 4 ("CCMP"). * WPA2 IEEE 802.1x (7): shall indicated that the desired authentication method is WPA2 (Wi-Fi Protected Access Version 2) IEEE 802.1x. AuthenticationMethod should contain 7 only if EncryptionMethod contains 3 ("TKIP") or 4 ("CCMP").
MappingStringsstringIEEE 802.11-2007 | 8
ModelCorrespondencestringCIM_WiFiEndpoint.AuthenticationMethod, CIM_WiFiEndpointSettings.EncryptionMethod, CIM_WiFiEndpointSettings.OtherAuthenticationMethod
ValueMapstring1, 2, 3, 4, 5, 6, 7, 8..
ValuesstringOther, Open System, Shared Key, WPA PSK, WPA IEEE 802.1x, WPA2 PSK, WPA2 IEEE 802.1x, DMTF Reserved
BSSTypeuint16
DescriptionstringBSSType shall indicate the Basic Service Set (BSS) Type that shall be used when the settings are applied. A Basic Service Set is a set of stations controlled by a single coordination function. * Independent: the WiFiEndpoint is associated directly to another client station. * Infrastructure: the WiFiEndpoint is associated to a network via an access point.
MappingStringsstringIEEE 802.11-2007 | 3.16
ValueMapstring0, 2, 3, ..
ValuesstringUnknown, Independent, Infrastructure, DMTF Reserved
EncryptionMethoduint16
DescriptionstringEncryptionMethod shall specify the 802.11 encryption method used when the settings are applied. * Other (1): shall indicate that the desired encryption method is not specified in the list below. If this value is used, OtherEncryptionMethod should not be NULL and should not be empty. * WEP (2): shall indicate that the desired encryption method is Wired Equivalency Privacy (WEP). This value should be used only if AuthenticationMethod contains 2 ("Open System") or 3 ("Shared Key"). * TKIP (3): shall indicate that the desired encryption method is Temporal Key Integrity Protocol (TKIP). This value should be used only if AuthenticationMethod contains 4 ("WPA PSK"), 5 ("WPA IEEE 802.1x"), 6 ("WPA2 PSK"), or 7 ("WPA2 IEEE 802.1x"). * CCMP (4): shall indicate that the desired encryption method is Counter Mode with Cipher Block Chaining Message Authentication Code Protocol (CCMP). This value should be used only if AuthenticationMethod contains 4 ("WPA PSK"), 5 ("WPA IEEE 802.1x"), 6 ("WPA2 PSK"), or 7 ("WPA2 IEEE 802.1x"). * None (5): shall indicate that no encryption is desired. This value should be used only if AuthenticationMethod contains 2 ("Open System") or 3 ("Shared Key").
MappingStringsstringIEEE 802.11-2007 | 8
ModelCorrespondencestringCIM_WiFiEndpoint.EncryptionMethod, CIM_WiFiEndpointSettings.AuthenticationMethod, CIM_WiFiEndpointSettings.OtherEncryptionMethod
ValueMapstring1, 2, 3, 4, 5, 6..
ValuesstringOther, WEP, TKIP, CCMP, None, DMTF Reserved
KeyIndexuint8
DescriptionstringKeyIndex shall contain the index of the active key in the Keys array property. KeyIndex should be non-NULL if and only Keys is non-NULL.
MappingStringsstringMIB.IETF|IEEE 802.11 MIB.dot11WEPDefaultKeyID
ModelCorrespondencestringCIM_WiFiEndpointSettings.Keys
OtherAuthenticationMethodstring
DescriptionstringOtherAuthenticationMethod shall specify the 802.11 authentication method used when the settings are applied if and only if AuthenticationMethod contains "Other". The format of this string shall be vendor-specific.
ModelCorrespondencestringCIM_WiFiEndpoint.OtherAuthenticationMethod, CIM_WiFiEndpointSettings.AuthenticationMethod
OtherEncryptionMethodstring
DescriptionstringOtherEncryptionMethod shall specify the 802.11 encryption method used when the settings are applied if and only if EncryptionMethod contains "Other". The format of this string shall be vendor-specific.
ModelCorrespondencestringCIM_WiFiEndpoint.OtherEncryptionMethod, CIM_WiFiEndpointSettings.EncryptionMethod
Priorityuint8
DescriptionstringPriority shall indicate the priority of the instance among all WiFiEndpointSettings instances.
PSKPassPhrasestring
DescriptionstringAn ASCII alphanumeric string used to generate a PSK (pre-shared key). PSKPassPhrase and PSKValue should not both be non-NULL. PSKPassPhrase should be NULL if AuthenticationMethod does not contain 4 ("WPA PSK") or 6 ("WPA2 PSK").
MappingStringsstringMIB.IETF|IEEE 802.11 MIB.dot11RSNAConfigPSKPassPhrase
MaxLenuint3263
MinLenuint328
ModelCorrespondencestringCIM_WiFiEndpointSettings.PSKValue, CIM_WiFiEndpointSettings.AuthenticationMethod
SSIDstring
DescriptionstringSSID shall indicate the Service Set Identifier (SSID) that shall be used when the settings are applied to a WiFiEndpoint. An SSID identifies a wireless network.
MappingStringsstringIEEE 802.11-2007 | 7.3.2.1
Keysstring[]
ArrayTypestringIndexed
DescriptionstringKeys shall contain the default WEP encryption keys. Keys should be non-NULL if and only if EncryptionMethod contains 2 ("WEP").
MappingStringsstringMIB.IETF|IEEE 802.11 MIB.dot11WEPDefaultKeys
ModelCorrespondencestringCIM_WiFiEndpointSettings.KeyIndex, CIM_WiFiEndpointSettings.EncryptionMethod
OctetStringbooleantrue
PSKValueuint8[]
DescriptionstringThe actual binary value of a PSK (pre-shared key). PSKValue and PSKPassPhrase should not both be non-NULL. PSKValue should be NULL if AuthenticationMethod does not contain 4 ("WPA PSK") or 6 ("WPA2 PSK").
MappingStringsstringMIB.IETF|IEEE 802.11 MIB.dot11RSNAConfigPSKValue
ModelCorrespondencestringCIM_WiFiEndpointSettings.PSKPassPhrase, CIM_WiFiEndpointSettings.AuthenticationMethod
OctetStringbooleantrue

Inherited Properties

NameData TypeClass Origin
CaptionstringCIM_ManagedElement
ChangeableTypeuint16CIM_SettingData
ConfigurationNamestringCIM_SettingData
DescriptionstringCIM_ManagedElement
ElementNamestringCIM_SettingData
Generationuint64CIM_ManagedElement
InstanceIDstringCIM_SettingData
SoIDstringCIM_SettingData
SoOrgIDstringCIM_SettingData
ComponentSettingstring[]CIM_SettingData

Class Methods