Class CIM_PowerManagementCapabilities
extends CIM_Capabilities

A class derived from Capabilities that describes the power management aspects of an element (typically a system or device). The element's power management capabilities are decoupled from a PowerManagementService, since a single service could apply to multiple elements, each with specific capabilities.

Table of Contents
Hierarchy
Direct Known Subclasses
Class Qualifiers
Class Properties
Class Methods


Class Hierarchy

CIM_ManagedElement
   |
   +--CIM_Capabilities
   |
   +--CIM_PowerManagementCapabilities

Direct Known Subclasses

Class Qualifiers

NameData TypeValue
DescriptionstringA class derived from Capabilities that describes the power management aspects of an element (typically a system or device). The element's power management capabilities are decoupled from a PowerManagementService, since a single service could apply to multiple elements, each with specific capabilities.
UMLPackagePathstringCIM::Core::PowerMgmt
Versionstring2.23.0

Class Properties

Local Class Properties

NameData TypeDefault ValueQualifiers
NameData TypeValue
OtherPowerChangeCapabilitiesstring
DescriptionstringA string describing the additional power management capabilities of the element, used when the PowerChangeCapabilities is set to the value 1, "Other".
ModelCorrespondencestringCIM_PowerManagementCapabilities.PowerChangeCapabilities
OtherPowerCapabilitiesDescriptionsstring[]
DescriptionstringAn array of strings describing an element's additional power management capabilities, used when the PowerCapabilities array includes the value 1, "Other".
ModelCorrespondencestringCIM_PowerManagementCapabilities.PowerCapabilities
PowerCapabilitiesuint16[]
DescriptionstringAn enumeration indicating the specific power-related capabilities of a managed element. Since this is an array, multiple values may be specified. The current values in the enumeration are: 0 = Unknown 1 = Other 2 = Power Saving Modes Entered Automatically, describing that a managed element can change its power state based on usage or other criteria 3 = Power State Settable, indicating that the SetPowerState method is supported 4 = Power Cycling Supported, indicating that the SetPowerState method can be invoked with the PowerState input variable set to 'Power Cycle' 5 = Timed Power On Supported, indicating that the SetPowerState method can be invoked with the PowerState input variable set to 'Power Cycle' and the Time parameter set to a specific date and time, or interval, for power-on.
MappingStringsstringMIF.DMTF|System Power Controls|001.2
ModelCorrespondencestringCIM_PowerManagementCapabilities.OtherPowerCapabilitiesDescriptions, CIM_PowerManagementService.SetPowerState
ValueMapstring0, 1, 2, 3, 4, 5
ValuesstringUnknown, Other, Power Saving Modes Entered Automatically, Power State Settable, Power Cycling Supported, Timed Power On Supported
PowerChangeCapabilitiesuint16[]
DescriptionstringAn enumeration indicating the specific power-related capabilities of a managed element. Since this is an array, multiple values may be specified. The current values in the enumeration are: 0 = Unknown 1 = Other 2 = Power Saving Modes Entered Automatically, describing that a managed element can change its power state based on usage or other criteria 3 = Power State Settable, indicating that the RequestPowerStateChange method is supported 4 = Power Cycling Supported, indicating that the RequestPowerStateChange method can be invoked with the PowerState input variable set to 'Power Cycle (Off Soft)' 5 = Timed Power On Supported, indicating that the RequestPowerStateChange method can be invoked with the PowerState input variable set to 'Power On' and the Time parameter set to a specific date and time, or interval, for power-on.8 = Graceful Shutdown Supported, indicating that the managed element can be sent a hardware signal requesting an orderly shutdown prior to the requested power state change.
ModelCorrespondencestringCIM_PowerManagementService.RequestPowerStateChange, CIM_PowerManagementCapabilities.OtherPowerChangeCapabilities
ValueMapstring0, 1, 2, 3, 4, 5, 6, 7, 8
ValuesstringUnknown, Other, Power Saving Modes Entered Automatically, Power State Settable, Power Cycling Supported, Timed Power On Supported, Off Hard Power Cycling Supported, HW Reset Supported, Graceful Shutdown Supported
PowerStatesSupporteduint16[]
DescriptionstringAn enumeration that indicates the power states supported by a managed element. Because this is an array, multiple values can be specified. The current values in the enumeration are: 2=On, corresponding to ACPI state G0 or S0 or D0. 3=Sleep - Light, corresponding to ACPI state G1, S1/S2, or D1. 4=Sleep - Deep, corresponding to ACPI state G1, S3, or D2. 5=Power Cycle (Off - Soft), corresponding to ACPI state G2, S5, or D3, but where the managed element is set to return to power state "On" at a pre-determined time. 6=Off - Hard, corresponding to ACPI state G3, S5, or D3. 7=Hibernate (Off - Soft), corresponding to ACPI state S4, where the state of the managed element is preserved and will be recovered upon powering on. 8=Off - Soft, corresponding to ACPI state G2, S5, or D3. 9= Power Cycle (Off-Hard), corresponds to the managed element reaching the ACPI state G3 followed by ACPI state S0. 10=Master Bus Reset, corresponds to the system reaching ACPI state S5 followed by ACPI state S0. This is used to represent system master bus reset. 11=Diagnostic Interrupt (NMI), corresponding to the system reaching ACPI state S5 followed by ACPI state S0. This is used to represent system non-maskable interrupt. 12=Off - Soft Graceful, equivalent to Off Soft but preceded by a request to the managed element to perform an orderlyshutdown. 13=Off - Hard Graceful, equivalent to Off Hard but preceded by a request to the managed element to perform an orderly shutdown. 14=Master Bus Rest Graceful, equivalent to Master Bus Reset but preceded by a request to the managed element to perform an orderly shutdown. 15=Power Cycle (Off - Soft Graceful), equivalent to Power Cycle (Off - Soft) but preceded by a request to the managed element to perform an orderly shutdown. 16=Power Cycle (Off - Hard Graceful), equivalent to Power Cycle (Off - Hard) but preceded by a request to the managed element to perform an orderly shutdown. ..=DMTF Reserved. 0x7FFF..0xFFFF = Vendor Specific.
MappingStringsstringIEEE P1621 | 3.2
ModelCorrespondencestringCIM_PowerManagementService.RequestPowerStateChange, CIM_AssociatedPowerManagementService.PowerState
ValueMapstring1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, .., 0x7FFF..0xFFFF
ValuesstringOther, On, Sleep - Light, Sleep -Deep, Power Cycle (Off - Soft), Off - Hard, Hibernate (Off - Soft), Off - Soft, Power Cycle (Off-Hard), Master Bus Reset, Diagnostic Interrupt (NMI), Off - Soft Graceful, Off - Hard Graceful, Master Bus Reset Graceful, Power Cycle (Off - Soft Graceful), Power Cycle (Off - Hard Graceful), DMTF Reserved, Vendor Specific
RequestedPowerStatesSupporteduint16[]
DescriptionstringAn enumeration that indicates the requested power states supported by the power management service. Because this is an array, multiple values can be specified. The current values in the enumeration are: 2=On, corresponding to ACPI state G0 or S0 or D0. 3=Sleep - Light, corresponding to ACPI state G1, S1/S2, or D1. 4=Sleep - Deep, corresponding to ACPI state G1, S3, or D2. 5=Power Cycle (Off - Soft), corresponding to ACPI state G2, S5, or D3, but where the managed element is set to return to power state "On" at a pre-determined time. 6=Off - Hard, corresponding to ACPI state G3, S5, or D3. 7=Hibernate (Off - Soft), corresponding to ACPI state S4, where the state of the managed element is preserved and will be recovered upon powering on. 8=Off - Soft, corresponding to ACPI state G2, S5, or D3. 9= Power Cycle (Off-Hard), corresponds to the managed element reaching the ACPI state G3 followed by ACPI state S0. 10=Master Bus Reset, corresponds to the system reaching ACPI state S5 followed by ACPI state S0. This is used to represent system master bus reset. 11=Diagnostic Interrupt (NMI), corresponding to the system reaching ACPI state S5 followed by ACPI state S0. This is used to represent system non-maskable interrupt. 12=Off - Soft Graceful, equivalent to Off Soft but preceded by a request to the managed element to perform an orderlyshutdown. 13=Off - Hard Graceful, equivalent to Off Hard but preceded by a request to the managed element to perform an orderly shutdown. 14=Master Bus Rest Graceful, equivalent to Master Bus Reset but preceded by a request to the managed element to perform an orderly shutdown. 15=Power Cycle (Off - Soft Graceful), equivalent to Power Cycle (Off - Soft) but preceded by a request to the managed element to perform an orderly shutdown. 16=Power Cycle (Off - Hard Graceful), equivalent to Power Cycle (Off - Hard) but preceded by a request to the managed element to perform an orderly shutdown. 17=Diagnostic Interrupt (INIT), equivalent to Diagnostic Interrupt (NMI) but performed by an INIT switch instead because the NMI signal is masked. ..=DMTF Reserved. 0x7FFF..0xFFFF = Vendor Specific.
MappingStringsstringIEEE P1621 | 3.2
ModelCorrespondencestringCIM_PowerManagementCapabilities.PowerStatesSupported, CIM_PowerManagementService.RequestPowerStateChange, CIM_AssociatedPowerManagementService.PowerState
ValueMapstring1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, .., 0x7FFF..0xFFFF
ValuesstringOther, On, Sleep - Light, Sleep -Deep, Power Cycle (Off - Soft), Off - Hard, Hibernate (Off - Soft), Off - Soft, Power Cycle (Off-Hard), Master Bus Reset, Diagnostic Interrupt (NMI), Off - Soft Graceful, Off - Hard Graceful, Master Bus Reset Graceful, Power Cycle (Off - Soft Graceful), Power Cycle (Off - Hard Graceful), Diagnostic Interrupt (INIT), DMTF Reserved, Vendor Specific

Inherited Properties

NameData TypeClass Origin
CaptionstringCIM_ManagedElement
DescriptionstringCIM_ManagedElement
ElementNamestringCIM_Capabilities
InstanceIDstringCIM_Capabilities

Class Methods