Class CIM_TimeZone
extends CIM_Setting

The TimeZone class is a set of properties defining a particular time zone. These properties include the concept of daylight saving time.

Table of Contents
Hierarchy
Direct Known Subclasses
Class Qualifiers
Class Properties
Class Methods


Class Hierarchy

CIM_ManagedElement
   |
   +--CIM_Setting
   |
   +--CIM_TimeZone

Direct Known Subclasses

Class Qualifiers

NameData TypeValue
DescriptionstringThe TimeZone class is a set of properties defining a particular time zone. These properties include the concept of daylight saving time.
UMLPackagePathstringCIM::System::Time
Versionstring2.6.0

Class Properties

Local Class Properties

NameData TypeDefault ValueQualifiers
NameData TypeValue
DaylightCaptionstring
DescriptionstringShort name of the 'daylight' time zone (e.g., "EDT"), suitable for presentation to the user in the default locale. Note that a specific DaylightCaption property is defined, instead of using the inherited Caption. This is done to force consistent property naming for the StandardXXX and DaylightXXX properties.
ModelCorrespondencestringCIM_TimeZone.DaylightName
DaylightDaysint8
DescriptionstringThere are two different interpretations for this property, depending on the value of DaylightDayOfWeek. In one case, DaylightDay defines the day-in-month on which daylight saving time starts. This interpretation is used when the DaylightDayOfWeek is 0. A positive or negative integer is specified to indicate whether the DaylightDay should be calculated from the beginning or the end of the month. For example, 5 indicates the fifth day in the DaylightMonth and -1 indicates the last day in the DaylightMonth. When DaylightDayOfWeek is not 0, DaylightDay is the day- in-month on which daylight saving time starts, defined in conjunction with DaylightDayOfWeek. For example, if DaylightDay is 15 and DaylightDayOfWeek is Saturday, then daylight saving time starts on the first Saturday on or after the 15th day in the DaylightMonth (i.e., the third Saturday in the month). If DaylightDay is 20 and DaylightDayOfWeek is -Saturday, then this indicates the first Saturday on or before the 20th day in the DaylightMonth. If DaylightDay is -1 and DaylightDayOfWeek is -Sunday, then this indicates the last Sunday in the month.
MaxValuesint6431
MinValuesint64-31
ModelCorrespondencestringCIM_TimeZone.DaylightDayOfWeek
DaylightDayOfWeeksint8
DescriptionstringPositive or negative integer used in conjunction with DaylightDay to indicate the day of the week on which daylight saving time starts. Set DaylightDayOfWeek to 0 to indicate an exact day of month, such as March 1. Positive integer (Sunday, Monday, ..., Saturday) means that the day of week is found on or after DaylightDay. Negative integer (-Sunday, -Monday, ..., -Saturday) means that the day of week is found on or before DaylightDay.
ModelCorrespondencestringCIM_TimeZone.DaylightDay
ValueMapstring-7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7
Valuesstring-Saturday, -Friday, -Thursday, -Wednesday, -Tuesday, -Monday, -Sunday, ExactDayOfMonth, Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday
DaylightMonthuint8
DescriptionstringThe month in which daylight saving time starts. Specify 0 for January, 1 for February, and so on.
ModelCorrespondencestringCIM_TimeZone.DaylightDay
ValueMapstring0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
ValuesstringJanuary, February, March, April, May, June, July, August, September, October, November, December
DaylightNamestring
DescriptionstringFull name of the 'daylight' time zone (e.g., "U.S. Eastern Daylight Saving Time"), suitable for presentation to the user in the default locale.
ModelCorrespondencestringCIM_TimeZone.DaylightCaption
DaylightOffsetsint32
DescriptionstringThe number of minutes by which this daylight saving time differs from UTC. For example, U.S. EDT differs from UTC by -4.0 hours or -240 minutes, whereas Australia Adelaide Daylight Time differs by 10.5 hours or 630 minutes.
UnitsstringMinutes
DaylightStartIntervaldatetime
DescriptionstringThe time interval after midnight when daylight saving time starts. For example, 00000000020000.000000:000 indicates that daylight saving time starts at two o'clock, local time (usually, standard time).
StandardCaptionstring
DescriptionstringShort name of the 'standard' time zone (e.g., "EST"), suitable for presentation to the user in the default locale. Note that a specific StandardCaption property is defined, instead of using the inherited Caption. This is done to force consistent property naming for the StandardXXX and DaylightXXX properties.
ModelCorrespondencestringCIM_TimeZone.StandardName
StandardDaysint8
DescriptionstringThere are two different interpretations for this property, depending on the value of StandardDayOfWeek. In one case, StandardDay defines the day-in-month on which daylight saving time ends. This interpretation is used when the StandardDayOfWeek is 0. A positive or negative integer is specified to indicate whether the StandardDay should be calculated from the beginning or the end of the month. For example, 5 indicates the fifth day in the StandardMonth and -1 indicates the last day in the StandardMonth. When StandardDayOfWeek is not 0, StandardDay is the day- in-month on which daylight saving time ends, defined in conjunction with StandardDayOfWeek. For example, if StandardDay is 15 and StandardDayOfWeek is Saturday, then daylight saving time ends on the first Saturday on or after the 15th day in the StandardMonth (i.e., the third Saturday in the month). If StandardDay is 20 and StandardDayOfWeek is -Saturday, then this indicates the first Saturday on or before the 20th day in the StandardMonth. If StandardDay is -1 and StandardDayOfWeek is -Sunday, then this indicates the last Sunday in the StandardMonth.
MaxValuesint6431
MinValuesint64-31
ModelCorrespondencestringCIM_TimeZone.StandardDayOfWeek
StandardDayOfWeeksint8
DescriptionstringPositive or negative integer used in conjunction with StandardDay to indicate the day of the week on which daylight saving time ends (and 'standard' time begins). StandardDayOfWeek is set to 0 to indicate an exact day of the month, such as March 1. A positive integer (representing Sunday, Monday, ..., Saturday) means that the day of week is found on or after the specified StandardDay. A negative integer (representing -Sunday, -Monday, ..., -Saturday) means that the day of week is found on or before the StandardDay.
ModelCorrespondencestringCIM_TimeZone.StandardDay
ValueMapstring-7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7
Valuesstring-Saturday, -Friday, -Thursday, -Wednesday, -Tuesday, -Monday, -Sunday, ExactDayOfMonth, Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday
StandardMonthuint8
DescriptionstringThe month in which daylight saving time ends (and 'standard' time begins). Specify 0 for January, 1 for February, and so on.
ModelCorrespondencestringCIM_TimeZone.StandardDay
ValueMapstring0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
ValuesstringJanuary, February, March, April, May, June, July, August, September, October, November, December
StandardNamestring
DescriptionstringFull name of the 'standard' time zone (e.g., "U.S. Eastern Standard Time"), suitable for presentation to the user in the default locale.
ModelCorrespondencestringCIM_TimeZone.StandardCaption
StandardOffsetsint32
DescriptionstringThe number of minutes by which this 'standard' time differs from UTC. For example, U.S. EST differs from UTC by -5.0 hours or -300 minutes, whereas Australia Adelaide Standard Time differs by 9.5 hours or 570 minutes.
UnitsstringMinutes
StandardStartIntervaldatetime
DescriptionstringThe time interval after midnight when daylight saving time ends. For example, 00000000020000.000000:000 indicates that daylight saving time ends at two o'clock, local time (usually, daylight saving time).
TimeZoneIDstring
DescriptionstringTime zone identifier. The Id MAY be expressed in the form 'area name/city name' (e.g., "America/New_York"), or as a time zone name (for example, EST or EDT).
Keybooleantrue
TimeZoneStartDatedatetime
DescriptionstringThe date and time at which this time zone definition takes effect. The value is specified in UTC.
Keybooleantrue

Inherited Properties

NameData TypeClass Origin
CaptionstringCIM_ManagedElement
DescriptionstringCIM_ManagedElement
ElementNamestringCIM_ManagedElement
Generationuint64CIM_ManagedElement
InstanceIDstringCIM_ManagedElement
SettingIDstringCIM_Setting

Class Methods

Inherited Class Methods

NameReturn TypeClass Origin
ApplyIncrementalChangeToCollectionuint32CIM_Setting
ApplyIncrementalChangeToMSEuint32CIM_Setting
ApplyToCollectionuint32CIM_Setting
ApplyToMSEuint32CIM_Setting
VerifyOKToApplyIncrementalChangeToCollectionuint32CIM_Setting
VerifyOKToApplyIncrementalChangeToMSEuint32CIM_Setting
VerifyOKToApplyToCollectionuint32CIM_Setting
VerifyOKToApplyToMSEuint32CIM_Setting