Class CIM_StorageProtectionService
extends CIM_Service

This service defines the Protect method used to apply and modify the protection setting for a specified StorageVolume or LogicalDisk. The settings applied are used to protect a storage element from accidental or intentional overwriting. Accordingly, the settings set the read/write ability of the element, SCSI inquiry visibility, whether it can be copied over, and whether it can be exposed from the storage system. This service also allows the specification of a retention time, or length of time that these settings cannot be modified. The settings remain in effect after this time period expires until changed. The values of this setting are stored in the StorageProtectionSetting class associated to the StorageVolume pr LogicalDisk via ElementProtectionSettingData. The StorageProtectionSetting cannot be modified directly, but can only be modified via this service. While the element is being protected, the StorageProtectionSetting cannot be removed.

Table of Contents
Hierarchy
Direct Known Subclasses
Class Qualifiers
Class Properties
Class Methods

Name	Data Type	Value
Description	string	This service defines the Protect method used to apply and modify the protection setting for a specified StorageVolume or LogicalDisk. The settings applied are used to protect a storage element from accidental or intentional overwriting. Accordingly, the settings set the read/write ability of the element, SCSI inquiry visibility, whether it can be copied over, and whether it can be exposed from the storage system. This service also allows the specification of a retention time, or length of time that these settings cannot be modified. The settings remain in effect after this time period expires until changed. The values of this setting are stored in the StorageProtectionSetting class associated to the StorageVolume pr LogicalDisk via ElementProtectionSettingData. The StorageProtectionSetting cannot be modified directly, but can only be modified via this service. While the element is being protected, the StorageProtectionSetting cannot be removed.
UMLPackagePath	string	CIM::Device::Storage
Version	string	2.45.0

Class Properties

Inherited Properties

Name	Data Type	Class Origin
Caption	string	CIM_ManagedElement
CommunicationStatus	uint16	CIM_ManagedSystemElement
CreationClassName	string	CIM_Service
Description	string	CIM_ManagedElement
DetailedStatus	uint16	CIM_ManagedSystemElement
ElementName	string	CIM_ManagedElement
EnabledDefault	uint16	CIM_EnabledLogicalElement
EnabledState	uint16	CIM_EnabledLogicalElement
Generation	uint64	CIM_ManagedElement
HealthState	uint16	CIM_ManagedSystemElement
InstallDate	datetime	CIM_ManagedSystemElement
InstanceID	string	CIM_ManagedElement
LoSID	string	CIM_Service
LoSOrgID	string	CIM_Service
Name	string	CIM_Service
OperatingStatus	uint16	CIM_ManagedSystemElement
OtherEnabledState	string	CIM_EnabledLogicalElement
PrimaryOwnerContact	string	CIM_Service
PrimaryOwnerName	string	CIM_Service
PrimaryStatus	uint16	CIM_ManagedSystemElement
RequestedState	uint16	CIM_EnabledLogicalElement
Started	boolean	CIM_Service
StartMode	string	CIM_Service
Status	string	CIM_ManagedSystemElement
SystemCreationClassName	string	CIM_Service
SystemName	string	CIM_Service
TimeOfLastStateChange	datetime	CIM_EnabledLogicalElement
TransitioningToState	uint16	CIM_EnabledLogicalElement
AvailableRequestedStates	uint16[]	CIM_EnabledLogicalElement
OperationalStatus	uint16[]	CIM_ManagedSystemElement
StatusDescriptions	string[]	CIM_ManagedSystemElement

Class Methods

Local Class Methods

Protect (uint32)

Method Qualifiers (Protect)

Name	Data Type	Value
Description	string	The method creates or modifies the StorageProtectionSetting associated to the StorageVolume or LogicalDisk. This method is called to protect the StorageVolume or LogicalDisk against modification for a specific period of time. Values specified for this method will be set as properties of the StorageProtectionSetting instance that is associated to the specified StorageVolume or LogicalDisk. This method can be used to extend the retention period, but not decrease it.
ValueMap	string	0, 1, 2, 3, 4, 5, 6, 7..4095, 4096, 4097..32767, 32768..65535
Values	string	Success, Not Supported, Unspecified Error, Timeout, Failed, Invalid Parameter, Invalid State Transition, DMTF Reserved, Method parameters checked - job started, Method Reserved, Vendor Specific

Method Parameters (Protect)

Name	Type	Qualifiers
Name	Type	Name	Data Type	Value
Access	uint16
		Description	string	Read and write accessibility of the StorageVolume. 1: Read/Write Enabled 2: Read Only 3: Write Once 4: Read/Write Disabled.
		ValueMap	string	1, 2, 3, 4
		Values	string	Read/Write Enabled, Read Only, Write Once, Read/Write disabled
DenyAsCopyTarget	boolean
DenyAsCopyTarget	boolean	Description	string	Whether the storage element can be specified as a replica or not.
ElementType	uint16
		Description	string	Enumeration indicating the type of element being protected. 1: StorageVolume 2: LogicalDisk.
		ValueMap	string	1, 2
		Values	string	StorageVolume, LogicalDisk
LUNMappingConfigure	boolean
LUNMappingConfigure	boolean	Description	string	Whether LUN assignment to the StorageVolume is allowed or not.
ProtectExpirationType	uint16
		Description	string	Duration type of the storage element protection 1: None 2: Limited expiration 3: Permanent.
		ValueMap	string	1, 2, 3
		Values	string	None, Limited expiration, Permanent
TimePeriod	datetime
TimePeriod	datetime	Description	string	Amount of remaining time before a management application can change the access permission.
InquiryProtection	uint16[]
		Description	string	StorageVolume protection method for SCSI inquiry commands. 1: No SCSI Inquiry Protection 2: Inquiry Disabled 3: Zero Capacity Returned.
		ValueMap	string	1, 2, 3
		Values	string	No SCSI Inquiry Protection, Inquiry Disabled, Zero Capacity Returned
Element	REF CIM_StorageExtent
Element	REF CIM_StorageExtent	Description	string	StorageVolume or LogicalDisk to be configured.
Job	REF CIM_Job
		Description	string	Reference to the job created, if any.
		OUT	boolean	true

Inherited Class Methods

Name	Return Type	Class Origin
ChangeAffectedElementsAssignedSequence	uint32	CIM_Service
RequestStateChange	uint32	CIM_EnabledLogicalElement
StartService	uint32	CIM_Service
StopService	uint32	CIM_Service

Class CIM_StorageProtectionServiceextends CIM_Service

Table of Contents Hierarchy Direct Known Subclasses Class Qualifiers Class Properties Class Methods

Class Hierarchy

Direct Known Subclasses

Class Qualifiers