DMTF
Defines messages for WBEM operations.
Indicates that the operation (including method invocation) failed
because access to the WBEM server was denied. There is a number of possible root causes (including
incorrect or missing authentication and missing authorization), but for security reasons, the root
cause is not revealed to the WBEM client.
Access denied.
2
CIM_ERR_ACCESS_DENIED
4
Software Error
The ErrorSource property shall be NULL.
0
The ErrorSourceFormat property shall be 0 (Unknown).
The OtherErrorSourceFormat property shall be NULL.
Indicates that the operation (not including method invocation)
failed because it is not supported by the WBEM server infrastructure (e.g.,, CIMOM). Note that this
does not include the case where the operation is not supported by the CIM class implementation (e.g.,
CIM provider) which is covered by message WIPG0228, the case where method invocation is not
supported by the WBEM server infrastructure (e.g., CIMOM) which is covered by message WIPG0229, and
the case where a method is not supported by the CIM class implementation (e.g., CIM provider) which
is covered by message WIPG0219.
Operation "
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
" is not supported by the WBEM server infrastructure.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
7
CIM_ERR_NOT_SUPPORTED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a CIM namespace was not found.
CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
" not found.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
3
CIM_ERR_INVALID_NAMESPACE
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation or method failed because a required
input parameter was missing.
Required input parameter "
Name of the input parameter of the generic operation as defined in
DSP0223, or of the method as defined in the schema.
" was missing.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
4
CIM_ERR_INVALID_PARAMETER
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation or method failed because an input
parameter has been supplied more than once. Typically, the name of the input parameter is valid,
i.e., validity is verified before duplication.
Input parameter "
Name of the input parameter of the generic operation as defined in
DSP0223, or of the method as defined in the schema.
" has been supplied more than once.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
4
CIM_ERR_INVALID_PARAMETER
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation or method failed because an input
parameter with an unknown name has been supplied.
Unknown input parameter "
Name of the input parameter of the generic operation as defined in
DSP0223, or of the method as defined in the schema.
" has been supplied.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
4
CIM_ERR_INVALID_PARAMETER
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation or method failed because an input
parameter value has been supplied with a type that was not compatible with the type declared for
that parameter.
Input parameter "
Name of the input parameter of the generic operation as defined in
DSP0223, or of the method as defined in the schema.
" supplied as type "
Type of the parameter value supplied. The data type names are
defined by WBEM protocol mapping specifications.
" was not compatible with the declared type "
Type of the parameter value declared. The data type names are
defined by WBEM protocol mapping specifications.
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
4
CIM_ERR_INVALID_PARAMETER
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a CIM instance does not exist in a CIM namespace. The namespace typically does
exist.
CIM instance "
Model path of the CIM instance. The model path shall be
represented as a WBEM URI (as defined in DSP0207) that consists of the class name and key values.
" does not exist in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
6
CIM_ERR_NOT_FOUND
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a CIM class does not exist in a CIM namespace. The namespace typically does
exist.
CIM class "
Name of the CIM class.
" does not exist in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
5
CIM_ERR_INVALID_CLASS
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a CIM qualifier type (qualifier declaration) does not exist in a CIM namespace. The
namespace typically does exist.
CIM qualifier type "
Name of the CIM qualifier.
" does not exist in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
6
CIM_ERR_NOT_FOUND
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a CIM instance already exists in a CIM namespace.
CIM instance "
Model path of the CIM instance. The model path shall be
represented as a WBEM URI (as defined in DSP0207) that consists of the class name and key values.
" already exists in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
11
CIM_ERR_ALREADY_EXISTS
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a CIM class already exists in a CIM namespace.
CIM class "
Name of the CIM class.
" already exists in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
11
CIM_ERR_ALREADY_EXISTS
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a CIM method is not exposed by a CIM class. This is based upon comparing the method name,
without taking into account the parameters or return type.
CIM method "
Name of the CIM method.
" is not exposed by class "
Name of the CIM class.
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
17
CIM_ERR_METHOD_NOT_FOUND
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the method invocation operation failed because a CIM
method is not supported by a CIM class implementation (e.g., CIM provider). Typically, the method is
exposed by the class and the WBEM server infrastructure (e.g., CIMOM) supports method invocation.
Note that this does not include the case where CIM method invocation is not supported by the WBEM
service infrastructure (e.g., CIMOM) which is covered by message WIPG0229, and the case where an
operation other than method invocation is not supported by the CIM class implementation (e.g., CIM
provider) which is covered by message WIPG0228.
CIM method "
Name of the CIM method.
" is not supported by the implementation of class "
Name of the CIM class.
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
16
CIM_ERR_METHOD_NOT_AVAILABLE
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a CIM property is not exposed by a CIM class. This is based upon comparing the property
name, without taking into account the property type. Note that CIM references are special
properties.
CIM class "
Name of the CIM class.
" does not expose a property named "
Name of the CIM property.
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
12
CIM_ERR_NO_SUCH_PROPERTY
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a query language is unknown. Note that it may or may not be a valid query
language.
Query language "
Name of the query language.
"DMTF:CQL"DMTF CIM Query Language
Any other query language name
" is unknown.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
14
CIM_ERR_QUERY_LANGUAGE_NOT_SUPPORTED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a query requires support for query language features that are not supported.
Feature "
Name of the query language feature. For query language DMTF:CQL,
the feature shall be indicated using the strings defined by the Values qualifier of property
CIM_QueryCapabilities.CQLFeatures.
" of query language "
Name of the query language.
"DMTF:CQL"DMTF CIM Query Language
Any other query language name
" required by the query "
Query string.
" is not supported.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
29
CIM_ERR_QUERY_FEATURE_NOT_SUPPORTED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a query is invalid in a query language.
Query "
Query string.
" is not a valid query in query language "
Name of the query language.
"DMTF:CQL"DMTF CIM Query Language
Any other query language name
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
15
CIM_ERR_INVALID_QUERY
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a CIM class has one or more subclasses.
CIM class "
Name of the CIM class.
" has one or more subclasses in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
8
CIM_ERR_CLASS_HAS_CHILDREN
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a CIM class has one or more CIM instances.
CIM class "
Name of the CIM class.
" has one or more instances in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
9
CIM_ERR_CLASS_HAS_INSTANCES
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because the superclass of a CIM class does not exist in the CIM namespace of the class. The
namespace and the subject class typically do exist.
The superclass "
Name of the superclass of the CIM class.
" of CIM class "
Name of the CIM class.
" does not exist in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
10
CIM_ERR_INVALID_SUPERCLASS
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because an error occured with an operation or method other than those defined in this registry.
Occurences of this message typically indicate a need to extend this registry by more specific
messages.
Operation failed. Additional information: "
Additional text supplied by the WBEM server.
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
1
CIM_ERR_FAILED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (not including method invocation)
failed because it is not supported by the CIM class implementation (e.g., CIM provider). Typically,
the operation is supported by the WBEM server infrastructure (e.g., CIMOM). Note that this does not
include the case where the operation is not supported by the WBEM server infrastructure (e.g.,
CIMOM) which is covered by message WIPG0203, and the case where a method is not supported by the CIM
class implementation (e.g., CIM provider) which is covered by message WIPG0219.
Operation "
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223.
" is not supported by the implementation of CIM class "
Name of the CIM class.
".
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
7
CIM_ERR_NOT_SUPPORTED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the method invocation operation failed because CIM
method invocation is not supported by the WBEM server infrastructure (e.g., CIMOM). Note that this
does not include the case where a CIM method is not supported by the CIM class implementation (e.g.,
CIM provider) which is covered by message WIPG0219.
CIM method invocation is not supported by the WBEM server infrastructure.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
7
CIM_ERR_NOT_SUPPORTED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a CIM class has association classes defined in the same CIM namespace that reference the
class.
CIM class "
Name of the CIM class.
" has association classes defined that reference that class in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
1
CIM_ERR_FAILED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation failed because the modification
attempted for a CIM class is incompatible. The reason for the incompatibility is not detailed in
this message, and includes incompatibility with the prior definition of the class, incompatibility
with definitions in subclasses, incompatibility with existing instances of the class. For a
definition of compatible changes to classes refer to DSP0004.
CIM class "
Name of the CIM class.
" in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
" cannot be modified because the requested modification is incompatible.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
1
CIM_ERR_FAILED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because CIM instances exist with a creation class that is the class being targeted, or one of its
subclasses, in the same CIM namespace.
CIM class "
Name of the CIM class.
" or one of its subclasses have CIM instances in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
9
CIM_ERR_CLASS_HAS_INSTANCES
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a CIM qualifier type is used (i.e., specified) as a qualifier on a CIM element in a CIM
namespace. The operation typically would be a deletion of the qualifier type.
CIM qualifier type "
Name of the CIM qualifier.
" is used as a qualifier on a CIM element in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
1
CIM_ERR_FAILED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because the modification attempted for the CIM qualifier type is incompatible as per the definition
of compatible modifications in DSP0004. The operation typically would be a modification of the
qualifier type.
CIM qualifier type "
Name of the CIM qualifier.
" cannot be modified in an incompatible way.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
1
CIM_ERR_FAILED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation failed because continuation on error
is not supported.
Continuation on error is not supported.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
26
CIM_ERR_CONTINUATION_ON_ERROR_NOT_SUPPORTED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because the WBEM server is shutting down.
The WBEM server is shutting down.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
28
CIM_ERR_SERVER_IS_SHUTTING_DOWN
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation failed because using a filter query in
the enumeration is not supported by the WBEM server infrastructure.
The WBEM server infrastructure does not support filter queries.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
25
CIM_ERR_FILTERED_ENUMERATION_NOT_SUPPORTED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the Pull operation has been abandoned. Typically,
this is due to a successful concurrent execution of a CloseEnumeration operation on the enumeration
context.
Pull operation "
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
" has been abandoned because its enumeration context was closed.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
23
CIM_ERR_PULL_HAS_BEEN_ABANDONED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the attempt to abandon a Pull operation using the
CloseEnumeration operation has failed. The Pull operation proceeds normally. A possible reason is
that the WBEM server does not currently have control over the Pull operation. Future retries of
the attempt to abandon the Pull operation may or may not succeed.
Pull operation "
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
" cannot be abandoned.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
24
CIM_ERR_PULL_CANNOT_BE_ABANDONED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
indicates that the operation (including method invocation) failed
because the WBEM server has exceeded its limits. Examples for such limits are number of concurrent
connections, memory usage, number of instances to be processed or to be
returned. The client should retry the operation.
The WBEM server has exceeded its limits.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
27
CIM_ERR_SERVER_LIMITS_EXCEEDED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation failed because the specified
enumeration context value is invalid. Note that the WBEM server cannot determine whether the
enumeration context value represents an enumeration session that had been open at some point and is
now closed.
Invalid enumeration context.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
21
CIM_ERR_INVALID_ENUMERATION_CONTEXT
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation failed because the specified timeout
is invalid.
An operation timeout of
The timeout value that was specified, in a unit of
seconds.
seconds is invalid.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
22
CIM_ERR_INVALID_OPERATION_TIMEOUT
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because it has timed out.
The operation or method has timed out.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
1
CIM_ERR_FAILED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation failed because using filter queries in
the enumeration is not supported by the CIM class implementation (e.g., CIM
provider).
The implementation of CIM class "
Name of the CIM class.
" does not support filter queries.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
25
CIM_ERR_FILTERED_ENUMERATION_NOT_SUPPORTED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because the resulting CIM qualifier type would be inconsistent with the definition of that qualifier
type in DSP0004. The operation typically would be a modification or creation of the qualifier
type.
CIM qualifier type "
Name of the qualifier.
" cannot be modified or created because its requested definition
would be inconsistent with its DSP0004 definition.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
1
CIM_ERR_FAILED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a CIM instance cannot be deleted due to an association instance that references the instance
to be deleted, and this situation was decided to be handled by rejecting the deletion
request.
CIM instance "
Model path of the CIM instance. The model path shall be
represented as a WBEM URI (as defined in DSP0207) that consists of the class name and key values.
" in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
" cannot be deleted because it is referenced by association instance "
Model path of the CIM association instance. The model path shall be
represented as a WBEM URI (as defined in DSP0207) that consists of the class name and key values.
" in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
1
CIM_ERR_FAILED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an objectpath,
the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set to a
valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a CIM instance cannot be deleted due to an associated instance that requires a minimum
multiplicity (as defined by the Min qualifier or constrained by management profiles) on the instance
to be deleted that would be under-run by the deletion, and this situation was decided to be handled
by rejecting the deletion request.
CIM instance "
Model path of the CIM instance. The model path shall be
represented as a WBEM URI (as defined in DSP0207) that consists of the class name and key values.
" in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
" cannot be deleted because its deletion would under-run the minimum multiplicity
required by associated instance "
Model path of the CIM associated instance. The model path shall be
represented as a WBEM URI (as defined in DSP0207) that consists of the class name and key values.
" in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
" that is associated via association class "
Name of the association class that associates the instance to be
deleted with the instance that has the minimum multiplicity requirement.
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
1
CIM_ERR_FAILED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation (including method invocation) failed
because a CIM qualifier type already exists in a CIM namespace.
CIM qualifier type "
Name of the qualifier type.
" already exists in CIM namespace "
Name of the CIM namespace. For example, "interop" or "root/cimv2".
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
11
CIM_ERR_ALREADY_EXISTS
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the operation or method failed because an input
parameter value has been supplied that was considered invalid for some reason. This message should
be used only if there is no more specific message available. For example, an invalid instance path
in an input parameter should be handled using WIPG0213 (Instance not found).
Input parameter "
Name of the input parameter of the generic operation as defined in
DSP0223, or of the method as defined in the schema.
" has been supplied with the invalid value "
String formatted value of the parameter. The string format for all
data types is defined by WBEM protocol mapping specifications.
". Additional information: "
Additional text supplied by the WBEM server.
".
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223. This also applies to method invocation operations.
Identifies the method whose execution, if any, caused the message
to be produced. If a method was invoked, the value of the dynamic element shall be the name of the
method and the name of the class defining the method in the format (using ABNF): className "."
methodName. Otherwise, the value of the dynamic element shall be the empty string.
Provides the invocation context for the operation or method whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. This also applies to method invocation operations. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
4
CIM_ERR_INVALID_PARAMETER
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223. This also
applies to method invocation operations. If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the listener operation failed
because the WBEM listener is shutting down.
The WBEM listener is shutting down.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223.
Provides the invocation context for the operation whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
28
CIM_ERR_SERVER_IS_SHUTTING_DOWN
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223.
If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.
Indicates that the listener operation failed
because the WBEM listener has exceeded its limits. Examples for such limits are number of concurrent
connections, memory usage, or number of indication deliveries to be processed. The server should retry
the listener operation.
The WBEM listener has exceeded its limits.
Identifies the operation whose execution caused the message to be
produced. The value of the dynamic element shall be the name of the generic operation as defined in
DSP0223.
Provides the invocation context for the operation whose
execution caused the message to be produced. The value of the dynamic element shall be the value of
the parameter of the generic operation that is designated as context parameter, as defined in
DSP0223. If the context parameter is an object
path, it shall be represented as a WBEM URI, as defined in DSP0207.
27
CIM_ERR_SERVER_LIMITS_EXCEEDED
4
Software Error
The ErrorSource property shall contain the value of the parameter
of the generic operation that is designated as context parameter, as defined in DSP0223.
If the context parameter is an object path, it shall be
represented as a WBEM URI, as defined in DSP0207.
If the context parameter of the generic operation is an object
path, the ErrorSourceFormat property value shall be 2 (CIMObjectHandle). Otherwise, it shall be set
to a valid value, as defined in the CIM Schema and constrained by applicable management
profiles.
If the ErrorSourceFormat property value is set to 1 (Other), the
OtherErrorSourceFormat property value shall specify the format of the ErrorSource property value in
prosa text.