| Name | Data Type | Default Value | Qualifiers |
| Name | Data Type | Value |
| OtherPowerChangeCapabilities | string | |
| Description | string | A string describing the additional power management capabilities of the element, used when the PowerChangeCapabilities is set to the value 1, "Other". |
| ModelCorrespondence | string | CIM_PowerManagementCapabilities.PowerChangeCapabilities |
| OtherPowerCapabilitiesDescriptions | string[] | |
| Deprecated | string | CIM_PowerManagementCapabilities.OtherPowerChangeCapabilities |
| Description | string | An array of strings that describes the additional power management capabilities of an element, used when the PowerCapabilities array includes the value 1, "Other". |
| ModelCorrespondence | string | CIM_PowerManagementCapabilities.PowerCapabilities |
| PowerCapabilities | uint16[] | |
| Deprecated | string | CIM_PowerManagementCapabilities.PowerChangeCapabilities |
| Description | string | The CIM_PowerManagementCapabilities.PowerChangeCapabilities property should be used instead of PowerCapabilities property, which is deprecated. An enumeration indicating the specific power-related capabilities of a managed element. Because this is an array, multiple values can be specified. The current values in the enumeration are:
0=Unknown
1=Other
2=Power Saving Modes Entered Automatically, indicating that a managed element can change its power state based on usage or other criteria
3=Power State Settable, indicating that the SetPowerState method is supported
4=Power Cycling Supported, indicating that the SetPowerState method can be invoked with the PowerState input variable set to 'Power Cycle'
5=Timed Power On Supported, indicating that the SetPowerState method can be invoked with the PowerState input variable set to 'Power Cycle' and the Time parameter set to a specific date and time, or interval, for power-on. |
| MappingStrings | string | MIF.DMTF|System Power Controls|001.2 |
| ModelCorrespondence | string | CIM_PowerManagementCapabilities.OtherPowerCapabilitiesDescriptions, CIM_PowerManagementService.SetPowerState |
| ValueMap | string | 0, 1, 2, 3, 4, 5 |
| Values | string | Unknown, Other, Power Saving Modes Entered Automatically, Power State Settable, Power Cycling Supported, Timed Power On Supported |
| PowerChangeCapabilities | uint16[] | |
| Description | string | An enumeration indicating the specific power-related capabilities of a managed element. Since this is an array, multiple values may be specified. The current values in the enumeration are:
0 = Unknown
1 = Other
2 = Power Saving Modes Entered Automatically, describing that a managed element can change its power state based on usage or other criteria
3 = Power State Settable, indicating that the RequestPowerStateChange method is supported
4 = Power Cycling Supported, indicating that the RequestPowerStateChange method can be invoked with the PowerState input variable set to 'Power Cycle (Off Soft)'
5 = Timed Power On Supported, indicating that the RequestPowerStateChange method can be invoked with the PowerState input variable set to 'Power On' and the Time parameter set to a specific date and time, or interval, for power-on.8 = Graceful Shutdown Supported, indicating that the managed element can be sent a hardware signal requesting an orderly shutdown prior to the requested power state change. |
| ModelCorrespondence | string | CIM_PowerManagementService.RequestPowerStateChange, CIM_PowerManagementCapabilities.OtherPowerChangeCapabilities |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6, 7, 8 |
| Values | string | Unknown, Other, Power Saving Modes Entered Automatically, Power State Settable, Power Cycling Supported, Timed Power On Supported, Off Hard Power Cycling Supported, HW Reset Supported, Graceful Shutdown Supported |
| PowerStatesSupported | uint16[] | |
| Description | string | An enumeration that indicates the power states supported by a managed element. Because this is an array, multiple values can be specified. The current values in the enumeration are:
2=On, corresponding to ACPI state G0 or S0 or D0.
3=Sleep - Light, corresponding to ACPI state G1, S1/S2, or D1.
4=Sleep - Deep, corresponding to ACPI state G1, S3, or D2.
5=Power Cycle (Off - Soft), corresponding to ACPI state G2, S5, or D3, but where the managed element is set to return to power state "On" at a pre-determined time.
6=Off - Hard, corresponding to ACPI state G3, S5, or D3.
7=Hibernate (Off - Soft), corresponding to ACPI state S4, where the state of the managed element is preserved and will be recovered upon powering on.
8=Off - Soft, corresponding to ACPI state G2, S5, or D3. 9= Power Cycle (Off-Hard), corresponds to the managed element reaching the ACPI state G3 followed by ACPI state S0.
10=Master Bus Reset, corresponds to the system reaching ACPI state S5 followed by ACPI state S0. This is used to represent system master bus reset. 11=Diagnostic Interrupt (NMI), corresponding to the system reaching ACPI state S5 followed by ACPI state S0. This is used to represent system non-maskable interrupt. 12=Off - Soft Graceful, equivalent to Off Soft but preceded by a request to the managed element to perform an orderlyshutdown.
13=Off - Hard Graceful, equivalent to Off Hard but preceded by a request to the managed element to perform an orderly shutdown.
14=Master Bus Rest Graceful, equivalent to Master Bus Reset but preceded by a request to the managed element to perform an orderly shutdown.
15=Power Cycle (Off - Soft Graceful), equivalent to Power Cycle (Off - Soft) but preceded by a request to the managed element to perform an orderly shutdown.
16=Power Cycle (Off - Hard Graceful), equivalent to Power Cycle (Off - Hard) but preceded by a request to the managed element to perform an orderly shutdown.
17=Diagnostic Interrupt (INIT), equivalent to Diagnostic Interrupt (NMI) but performed by an INIT switch instead because the NMI signal is masked.
..=DMTF Reserved.
0x7FFF..0xFFFF = Vendor Specific. |
| MappingStrings | string | IEEE P1621 | 3.2 |
| ModelCorrespondence | string | CIM_PowerManagementService.RequestPowerStateChange, CIM_AssociatedPowerManagementService.PowerState |
| ValueMap | string | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, .., 0x7FFF..0xFFFF |
| Values | string | Other, On, Sleep - Light, Sleep -Deep, Power Cycle (Off - Soft), Off - Hard, Hibernate (Off - Soft), Off - Soft, Power Cycle (Off-Hard), Master Bus Reset, Diagnostic Interrupt (NMI), Off - Soft Graceful, Off - Hard Graceful, Master Bus Reset Graceful, Power Cycle (Off - Soft Graceful), Power Cycle (Off - Hard Graceful), Diagnostic Interrupt (INIT), DMTF Reserved, Vendor Specific |
| RequestedPowerStatesSupported | uint16[] | |
| Description | string | An enumeration that indicates the requested power states supported by the power management service. Because this is an array, multiple values can be specified. The current values in the enumeration are:
2=On, corresponding to ACPI state G0 or S0 or D0.
3=Sleep - Light, corresponding to ACPI state G1, S1/S2, or D1.
4=Sleep - Deep, corresponding to ACPI state G1, S3, or D2.
5=Power Cycle (Off - Soft), corresponding to ACPI state G2, S5, or D3, but where the managed element is set to return to power state "On" at a pre-determined time.
6=Off - Hard, corresponding to ACPI state G3, S5, or D3.
7=Hibernate (Off - Soft), corresponding to ACPI state S4, where the state of the managed element is preserved and will be recovered upon powering on.
8=Off - Soft, corresponding to ACPI state G2, S5, or D3. 9= Power Cycle (Off-Hard), corresponds to the managed element reaching the ACPI state G3 followed by ACPI state S0.
10=Master Bus Reset, corresponds to the system reaching ACPI state S5 followed by ACPI state S0. This is used to represent system master bus reset. 11=Diagnostic Interrupt (NMI), corresponding to the system reaching ACPI state S5 followed by ACPI state S0. This is used to represent system non-maskable interrupt. 12=Off - Soft Graceful, equivalent to Off Soft but preceded by a request to the managed element to perform an orderlyshutdown.
13=Off - Hard Graceful, equivalent to Off Hard but preceded by a request to the managed element to perform an orderly shutdown.
14=Master Bus Rest Graceful, equivalent to Master Bus Reset but preceded by a request to the managed element to perform an orderly shutdown.
15=Power Cycle (Off - Soft Graceful), equivalent to Power Cycle (Off - Soft) but preceded by a request to the managed element to perform an orderly shutdown.
16=Power Cycle (Off - Hard Graceful), equivalent to Power Cycle (Off - Hard) but preceded by a request to the managed element to perform an orderly shutdown.
17=Diagnostic Interrupt (INIT), equivalent to Diagnostic Interrupt (NMI) but performed by an INIT switch instead because the NMI signal is masked.
..=DMTF Reserved.
0x7FFF..0xFFFF = Vendor Specific. |
| MappingStrings | string | IEEE P1621 | 3.2 |
| ModelCorrespondence | string | CIM_PowerManagementCapabilities.PowerStatesSupported, CIM_PowerManagementService.RequestPowerStateChange, CIM_AssociatedPowerManagementService.PowerState |
| ValueMap | string | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, .., 0x7FFF..0xFFFF |
| Values | string | Other, On, Sleep - Light, Sleep -Deep, Power Cycle (Off - Soft), Off - Hard, Hibernate (Off - Soft), Off - Soft, Power Cycle (Off-Hard), Master Bus Reset, Diagnostic Interrupt (NMI), Off - Soft Graceful, Off - Hard Graceful, Master Bus Reset Graceful, Power Cycle (Off - Soft Graceful), Power Cycle (Off - Hard Graceful), Diagnostic Interrupt (INIT), DMTF Reserved, Vendor Specific |