| Name | Data Type | Default Value | Qualifiers |
| Name | Data Type | Value |
| Address | string | |
| Description | string | The address of the resource. For example, the MAC address of a Ethernet port. |
| AddressOnParent | string | |
| Description | string | Describes the address of this resource in the context of the Parent. The Parent/AddressOnParent properties are used to describe the controller relationship as well the ordering of devices on a controller.For example, if the parent is a PCI Controller, this property would specify the PCI slot of this child device. |
| AllocationUnits | string | |
| Description | string | This property specifies the units of allocation used by the Reservation and Limit properties. For example, when ResourceType=Processor, AllocationUnits may be set to hertz*10^6 or percent. When ResourceType=Memory, AllocationUnits may be set to bytes*10^3.
It is expected that profiles constrain the units that apply in context of particular resource types.
The value of this property shall be a legal value of the Programmatic Units qualifier as defined in Annex C.1 of DSP0004 V2.5 or later. |
| IsPUnit | boolean | true |
| ModelCorrespondence | string | CIM_ResourceAllocationSettingData.Reservation, CIM_ResourceAllocationSettingData.Limit |
| AutomaticAllocation | boolean | |
| Description | string | This property specifies if the resource will be automatically allocated. For example when set to true, when the consuming virtual computer system is powered on, this resource would be allocated. A value of false indicates the resource must be explicitly allocated. For example, the setting may represent removable media (cdrom, floppy, etc.) where at power on time, the media is not present. An explicit operation is required to allocate the resource. |
| AutomaticDeallocation | boolean | |
| Description | string | This property specifies if the resource will be automatically de-allocated. For example, when set to true, when the consuming virtual computer system is powered off, this resource would be de-allocated. When set to false, the resource will remain allocated and must be explicitly de-allocated. |
| ConsumerVisibility | uint16 | |
| Description | string | Describes the consumers visibility to the allocated resource.
A value of "Passed-Through" indicates the underlying or host resource is utilized and passed through to the consumer, possibly using partitioning. At least one item shall be present in the HostResource property.
A value of "Virtualized" indicates the resource is virtualized and may not map directly to an underlying/host resource. Some implementations may support specific assignment for virtualized resources, in which case the host resource(s) are exposed using the HostResource property.
A value of "Not represented" indicates a representation of the resource does not exist within the context of the resource consumer. |
| ValueMap | string | 0, 2, 3, 4, .., 32767..65535 |
| Values | string | Unknown, Passed-Through, Virtualized, Not represented, DMTF reserved, Vendor Reserved |
| Limit | uint64 | |
| Description | string | This property specifies the upper bound, or maximum amount of resource that will be granted for this allocation. For example, a system which supports memory paging may support setting the Limit of a Memory allocation below that of the VirtualQuantity, thus forcing paging to occur for this allocation.
The value of the Limit property is expressed in the unit specified by the value of the AllocationUnits property. |
| ModelCorrespondence | string | CIM_ResourceAllocationSettingData.AllocationUnits |
| MappingBehavior | uint16 | |
| Description | string | Specifies how this resource maps to underlying resourcesIf the HostResource array contains any entries, this property reflects how the resource maps to those specific resources. |
| ValueMap | string | 0, 2, 3, 4, 5, .., 32767..65535 |
| Values | string | Unknown, Not Supported, Dedicated, Soft Affinity, Hard Affinity, DMTF Reserved, Vendor Reserved |
| OtherResourceType | string | |
| Description | string | A string that describes the resource type when a well defined value is not available and ResourceType has the value "Other". |
| ModelCorrespondence | string | CIM_ResourceAllocationSettingData.ResourceType |
| Parent | string | |
| Description | string | The Parent of the resource. For example, a controller for the current allocation |
| PoolID | string | |
| Description | string | This property specifies which ResourcePool the resource is currently allocated from, or which ResourcePool the resource will be allocated from when the allocation occurs. |
| ModelCorrespondence | string | CIM_ResourcePool.PoolId |
| Reservation | uint64 | |
| Description | string | This property specifies the amount of resource guaranteed to be available for this allocation. On system which support over-commitment of resources, this value is typically used for admission control to prevent an an allocation from being accepted thus preventing starvation.
The value of the Reservation property is expressed in the unit specified by the value of the AllocationUnits property. |
| ModelCorrespondence | string | CIM_ResourceAllocationSettingData.AllocationUnits |
| ResourceSubType | string | |
| Description | string | A string describing an implementation specific sub-type for this resource. For example, this may be used to distinguish different models of the same resource type. |
| ModelCorrespondence | string | CIM_ResourceAllocationSettingData.ResourceType |
| ResourceType | uint16 | |
| Description | string | The type of resource this allocation setting represents. |
| ModelCorrespondence | string | CIM_ResourceAllocationSettingData.OtherResourceType, CIM_ResourceAllocationSettingData.ResourceSubType |
| ValueMap | string | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, .., 0x8000..0xFFFF |
| Values | string | Other, Computer System, Processor, Memory, IDE Controller, Parallel SCSI HBA, FC HBA, iSCSI HBA, IB HCA, Ethernet Adapter, Other Network Adapter, I/O Slot, I/O Device, Floppy Drive, CD Drive, DVD drive, Disk Drive, Tape Drive, Storage Extent, Other storage device, Serial port, Parallel port, USB Controller, Graphics controller, IEEE 1394 Controller, Partitionable Unit, Base Partitionable Unit, Power, Cooling Capacity, Ethernet Switch Port, Logical Disk, Storage Volume, Ethernet Connection, DMTF reserved, Vendor Reserved |
| VirtualQuantity | uint64 | |
| Description | string | This property specifies the quantity of resources presented to the consumer. For example, when ResourceType=Processor, this property would reflect the number of discrete Processors presented to the virtual computer system. When ResourceType=Memory, this property could reflect the number of MB reported to the virtual computer system.
The value of the VirtualQuantity property should be expressed in units as defined by the value of the VirtualQuantityUnits property. |
| ModelCorrespondence | string | CIM_ResourceAllocationSettingData.VirtualQuantityUnits |
| VirtualQuantityUnits | string | count |
| Description | string | This property specifies the units used by the VirtualQuantity property. For example
- if ResourceType=Processor, the value of the VirtualQuantityUnits property may be set to "count", indicating that the value of the VirtualQuantity property is expressed as a count.
- if ResourceType=Memory, the value of the VirtualQuantityUnits property may be set to "bytes*10^3", indicating that the value of the VirtualQuantity property is expressed in kilobyte.
It is expected that profiles constrain the units that apply in context of particular resource types.
The value of this property shall be a legal value of the Programmatic Units qualifier as defined in Annex C.1 of DSP0004 V2.5 or later. |
| IsPUnit | boolean | true |
| ModelCorrespondence | string | CIM_ResourceAllocationSettingData.VirtualQuantity |
| Weight | uint32 | |
| Description | string | This property specifies a relative priority for this allocation in relation to other allocations from the same ResourcePool. This property has no unit of measure, and is only relevant when compared to other allocations vying for the same host resources. |
| Connection | string[] | |
| Description | string | The thing to which this resource is connected. For example, a named network or switch port. |
| HostResource | string[] | |
| Description | string | This property exposes specific assignment of resources. Each non-null value of the HostResource property shall be formated as a URI per RFC3986.
If this resource is modeled then a value should be a WBEM URI (DSP0207). If the resource is not modeled then see the appropriate profile.
Profiles may further constrain the type of URI. A NULL value or empty array requests the implementation decide the kind of host resource.
If the virtual resource is mapped to more than oneunderlying resource, this property may be left NULL.
If NULL, the DeviceAllocatedFromPool or ResourceAllocationFromPool associations may be used to determine the pool of host resources this virtual resource may use. If specific assignment is utilized, all underlying resources used by this virtual resource should be listed.The kind of dependency is specified by the ConsumerVisibility and the MappingBehavior properties. Typically the array contains one item, however multiple host resources may be specified.
A client may set the value(s) to indicate that the requested virtual resource allocation be based on host resources that are identified by element values. |
| ModelCorrespondence | string | CIM_ResourceAllocationSettingData.ConsumerVisibility, CIM_ResourceAllocationSettingData.MappingBehavior |