Class CIM_StorageRelocationService
extends CIM_Service

Typically, a storage pool is established on a set of storage extents, and a volume is allocated to a storage pool with different performance characteristics (e.g. with different RPM drives, or different drive classes). Storage Relocation (SR) can relocate storage elements to a different storage pool, or relocate a storage element to a specified set of storage extents.The relocation source and target could be either local or remote. Two functions are defined in this class: RelocateStorageElementsToStoragePool and RelocateStorageElementToElements.

Table of Contents
Hierarchy
Direct Known Subclasses
Class Qualifiers
Class Properties
Class Methods

Name	Data Type	Value
Description	string	Typically, a storage pool is established on a set of storage extents, and a volume is allocated to a storage pool with different performance characteristics (e.g. with different RPM drives, or different drive classes). Storage Relocation (SR) can relocate storage elements to a different storage pool, or relocate a storage element to a specified set of storage extents.The relocation source and target could be either local or remote. Two functions are defined in this class: RelocateStorageElementsToStoragePool and RelocateStorageElementToElements.
Experimental	boolean	true
UMLPackagePath	string	CIM::Device::StorageServices

Class Properties

Inherited Properties

Name	Data Type	Class Origin
Caption	string	CIM_ManagedElement
CommunicationStatus	uint16	CIM_ManagedSystemElement
CreationClassName	string	CIM_Service
Description	string	CIM_ManagedElement
DetailedStatus	uint16	CIM_ManagedSystemElement
ElementName	string	CIM_ManagedElement
EnabledDefault	uint16	CIM_EnabledLogicalElement
EnabledState	uint16	CIM_EnabledLogicalElement
Generation	uint64	CIM_ManagedElement
HealthState	uint16	CIM_ManagedSystemElement
InstallDate	datetime	CIM_ManagedSystemElement
InstanceID	string	CIM_ManagedElement
Name	string	CIM_Service
OperatingStatus	uint16	CIM_ManagedSystemElement
OtherEnabledState	string	CIM_EnabledLogicalElement
PrimaryOwnerContact	string	CIM_Service
PrimaryOwnerName	string	CIM_Service
PrimaryStatus	uint16	CIM_ManagedSystemElement
RequestedState	uint16	CIM_EnabledLogicalElement
Started	boolean	CIM_Service
StartMode	string	CIM_Service
Status	string	CIM_ManagedSystemElement
SystemCreationClassName	string	CIM_Service
SystemName	string	CIM_Service
TimeOfLastStateChange	datetime	CIM_EnabledLogicalElement
TransitioningToState	uint16	CIM_EnabledLogicalElement
AvailableRequestedStates	uint16[]	CIM_EnabledLogicalElement
OperationalStatus	uint16[]	CIM_ManagedSystemElement
StatusDescriptions	string[]	CIM_ManagedSystemElement

Class Methods

Local Class Methods

RelocateStorageVolumesToStoragePool (uint32)

Method Qualifiers (RelocateStorageVolumesToStoragePool)

Name	Data Type	Value
Description	string	Start a job to relocate a specified set of volumes to a target StoragePool. Both relocation source and target could be either local or remote. If 0 is returned, the function completes successfully and no ConcreteJob instance was required. If 4096/0x1000 is returned, a ConcreteJob will be started to kick off the relocation. The Job's reference will be returned in the output parameter Job.
ValueMap	string	0, 1, 2, 3, 4, 5, 6, .., 4096, 4097, 4098..32767, 32768..65535
Values	string	Completed with No Error, Not Supported, Unknown, Timeout, Failed, Invalid Parameter, In Use, DMTF Reserved, Method Parameters Checked - Job Started, ElementType Not Supported, Method Reserved, Vendor Specific

Method Parameters (RelocateStorageVolumesToStoragePool)

Name	Type	Qualifiers
Name	Type	Name	Data Type	Value
TheElements	CIM_StorageVolume[]
		Description	string	As an input, TheElements is an array of storage volumes for the source of relocation. As an output, it represents the storage volumes after relocation. Notice that: 1) The input may not be identical to the output. One example is relocation from local to remote. 2)It is output only when the relocation operation succeeds.
		IN	boolean	true
		OUT	boolean	true
		Required	boolean	true
Job	REF CIM_ConcreteJob
		Description	string	Reference to the job (may be null if job completed).
		IN	boolean	false
		OUT	boolean	true
TargetPool	REF CIM_StoragePool
		Description	string	A reference to target storage pool instance used for relocation. As an input parameter, TargetPool specifies the storage pool to relocate source onto. As an output parameter, TargetPool represents the pool actually used as the relocation target. It is output only when the relocation succeeds.
		IN	boolean	true
		OUT	boolean	true
		Required	boolean	true
TargetSettingGoal	REF CIM_StorageSetting
		Description	string	The requirements for the relocation target pool. If set to a null value, the default configuration associated with the service will be used. This parameter should be a reference to a CIM_StorageSetting which represent the profile appropriate to the relocation target pool. If not NULL, this parameter will supply a new Goal for the target pool.
		IN	boolean	true

RelocateStoragePoolsToStoragePool (uint32)

Method Qualifiers (RelocateStoragePoolsToStoragePool)

Name	Data Type	Value
Description	string	Start a job to relocate a specified set of storage pools to a target StoragePool. Both relocation source and target could be either local or remote. If 0 is returned, the function completes successfully and no ConcreteJob instance was required. If 4096/0x1000 is returned, a ConcreteJob will be started to kick off the relocation. The Job's reference will be returned in the output parameter Job.
ValueMap	string	0, 1, 2, 3, 4, 5, 6, .., 4096, 4097, 4098..32767, 32768..65535
Values	string	Completed with No Error, Not Supported, Unknown, Timeout, Failed, Invalid Parameter, In Use, DMTF Reserved, Method Parameters Checked - Job Started, ElementType Not Supported, Method Reserved, Vendor Specific

Method Parameters (RelocateStoragePoolsToStoragePool)

Name	Type	Qualifiers
Name	Type	Name	Data Type	Value
TheElements	CIM_StoragePool[]
		Description	string	As an input, TheElements is an array of storage pools for the source of relocation. As an output, it represents the storage pools after relocation. Notice that: 1) The input may not be identical to the output. One example is relocation from local to remote. 2)It is output only when the relocation operation succeeds.
		IN	boolean	true
		OUT	boolean	true
		Required	boolean	true
Job	REF CIM_ConcreteJob
		Description	string	Reference to the job (may be null if job completed).
		IN	boolean	false
		OUT	boolean	true
TargetPool	REF CIM_StoragePool
		Description	string	A reference to target storage pool instance used for relocation. As an input parameter, TargetPool specifies the storage pool to relocate source onto. As an output parameter, TargetPool represents the pool actually used as the relocation target. It is output only when the relocation succeeds.
		IN	boolean	true
		OUT	boolean	true
		Required	boolean	true
TargetSettingGoal	REF CIM_StorageSetting
		Description	string	The requirements for the relocation target pool. If set to a null value, the default configuration associated with the service will be used. This parameter should be a reference to a CIM_StorageSetting which represent the profile appropriate to the relocation target pool. If not NULL, this parameter will supply a new Goal for the target pool.
		IN	boolean	true

RelocateStorageVolumeToStorageExtents (uint32)

Method Qualifiers (RelocateStorageVolumeToStorageExtents)

Name	Data Type	Value
Description	string	Start a job to relocate a StorageVolume to a specified group of storage extents. Both relocation source and target couldbe either local or remote. If 0 is returned, the function completed successfully and no ConcreteJob instance was required. If 4096/0x1000 is returned, a ConcreteJob will be started to kick off the relocation. The Job's reference will be returned in the output parameter Job.
ValueMap	string	0, 1, 2, 3, 4, 5, 6, .., 4096, 4097, 4098..32767, 32768..65535
Values	string	Completed with No Error, Not Supported, Unknown, Timeout, Failed, Invalid Parameter, In Use, DMTF Reserved, Method Parameters Checked - Job Started, ElementType Not Supported, Method Reserved, Vendor Specific

Method Parameters (RelocateStorageVolumeToStorageExtents)

Name	Type	Qualifiers
Name	Type	Name	Data Type	Value
InElements	CIM_StorageExtent[]
		Description	string	An array of StorageExtents that 'TheElement' is relocated to.
		IN	boolean	true
Job	REF CIM_ConcreteJob
		Description	string	Reference to the job (may be null if job completed).
		IN	boolean	false
		OUT	boolean	true
TargetSettingGoal	REF CIM_StorageSetting
		Description	string	The requirements for the relocation target element. If set to a null value, the default configuration associated with the service will be used. This parameter should be a reference to a CIM_StorageSetting which represents the profile appropriate to the relocation target elements. If not NULL, this parameter will supply a new Goal for the target elements.
		IN	boolean	true
TheElement	REF CIM_StorageVolume
		Description	string	As an input, TheElement is a storageVolume as the source ofrelocation. As an output, it represents the storageVolume after relocation. Notice that: 1) The input may not be identical to the output. One example is relocation from local to remote. 2) It is output only when the relocation operation succeeds.
		IN	boolean	true
		OUT	boolean	true
		Required	boolean	true

RelocateStoragePoolToStorageExtents (uint32)

Method Qualifiers (RelocateStoragePoolToStorageExtents)

Name	Data Type	Value
Description	string	Start a job to relocate a StoragePool to a specified group of storage extents. Both relocation source and target couldbe either local or remote. If 0 is returned, the function completed successfully and no ConcreteJob instance was required. If 4096/0x1000 is returned, a ConcreteJob will be started to kick off the relocation. The Job's reference will be returned in the output parameter Job.
ValueMap	string	0, 1, 2, 3, 4, 5, 6, .., 4096, 4097, 4098..32767, 32768..65535
Values	string	Completed with No Error, Not Supported, Unknown, Timeout, Failed, Invalid Parameter, In Use, DMTF Reserved, Method Parameters Checked - Job Started, ElementType Not Supported, Method Reserved, Vendor Specific

Method Parameters (RelocateStoragePoolToStorageExtents)

Name	Type	Qualifiers
Name	Type	Name	Data Type	Value
InElements	CIM_StorageExtent[]
		Description	string	An array of StorageExtents that 'TheElement' is relocated to.
		IN	boolean	true
Job	REF CIM_ConcreteJob
		Description	string	Reference to the job (may be null if job completed).
		IN	boolean	false
		OUT	boolean	true
TargetSettingGoal	REF CIM_StorageSetting
		Description	string	The requirements for the relocation target element. If set to a null value, the default configuration associated with the service will be used. This parameter should be a reference to a CIM_StorageSetting which represents the profile appropriate to the relocation target elements. If not NULL, this parameter will supply a new Goal for the target elements.
		IN	boolean	true
TheElement	REF CIM_StoragePool
		Description	string	As an input, TheElement is a storagePool as the source ofrelocation. As an output, it represents the storagePool after relocation. Notice that: 1) The input may not be identical to the output. One example is relocation from local to remote. 2) It is output only when the relocation operation succeeds.
		IN	boolean	true
		OUT	boolean	true
		Required	boolean	true

RelocateLogicalDiskToStorageExtents (uint32)

Method Qualifiers (RelocateLogicalDiskToStorageExtents)

Name	Data Type	Value
Description	string	Start a job to relocate a LogicalDisk to a specified group of storage extents. Both relocation source and target couldbe either local or remote. If 0 is returned, the function completed successfully and no ConcreteJob instance was required. If 4096/0x1000 is returned, a ConcreteJob will be started to kick off the relocation. The Job's reference will be returned in the output parameter Job.
ValueMap	string	0, 1, 2, 3, 4, 5, 6, .., 4096, 4097, 4098..32767, 32768..65535
Values	string	Completed with No Error, Not Supported, Unknown, Timeout, Failed, Invalid Parameter, In Use, DMTF Reserved, Method Parameters Checked - Job Started, ElementType Not Supported, Method Reserved, Vendor Specific

Method Parameters (RelocateLogicalDiskToStorageExtents)

Name	Type	Qualifiers
Name	Type	Name	Data Type	Value
InElements	CIM_StorageExtent[]
		Description	string	An array of StorageExtents that 'TheElement' is relocated to.
		IN	boolean	true
Job	REF CIM_ConcreteJob
		Description	string	Reference to the job (may be null if job completed).
		IN	boolean	false
		OUT	boolean	true
TargetSettingGoal	REF CIM_StorageSetting
		Description	string	The requirements for the relocation target element. If set to a null value, the default configuration associated with the service will be used. This parameter should be a reference to a CIM_StorageSetting which represents the profile appropriate to the relocation target elements. If not NULL, this parameter will supply a new Goal for the target elements.
		IN	boolean	true
TheElement	REF CIM_LogicalDisk
		Description	string	As an input, TheElement is a logicalDisk as the source ofrelocation. As an output, it represents the logicalDisk after relocation. Notice that: 1) The input may not be identical to the output. One example is relocation from local to remote. 2) It is output only when the relocation operation succeeds.
		IN	boolean	true
		OUT	boolean	true
		Required	boolean	true

GetAvailableTargetRelocationExtents (uint32)

Method Qualifiers (GetAvailableTargetRelocationExtents)

Name	Data Type	Value
Description	string	This method can be used to retrieve a list of available target Extents that may be used in the relocation of a StoragePool, StorageVolume, or LogicalDisk. This method MUST return Extents from InPool. The returned Extents are available at the time the method returns. There is no guarantee that the same Extents will be available later. This method MUST return the Extents that are not being used as supporting capacity for any other Pools, Volumes, or LogicalDisks that have been allocated from this Pool.
ValueMap	string	0, 1, 2, 3, 4, 5, 6, .., 4098..32767, 32768..65535
Values	string	Completed with No Error, Not Supported, Unknown, Timeout, Failed, Invalid Parameter, In Use, DMTF Reserved, Method Reserved, Vendor Specific

Method Parameters (GetAvailableTargetRelocationExtents)

Name	Type	Qualifiers
Name	Type	Name	Data Type	Value
AvailableExtents	CIM_StorageExtent[]
		Description	string	List of references to available StorageExtents for relocation.
		OUT	boolean	true
InPool	REF CIM_StoragePool
		Description	string	A reference to target storage pool instance used for relocation. InPool specifies the storage pool to relocate source onto.
		IN	boolean	true
		Required	boolean	true
TargetSettingGoal	REF CIM_StorageSetting
		Description	string	The TargetSettingGoal for which supported extents should be retrieved as available. If a NULL is passed for the Goal, the method will return all available extents, regardless of the goal. There exists a possibility of error in relocating a Pool, Volume, or LogicalDisk to extents retrieved in this manner.
		IN	boolean	true
TheElement	REF CIM_LogicalElement
		Description	string	TheElement is a storage element as the source of relocation.
		IN	boolean	true
		Required	boolean	true

Inherited Class Methods

Name	Return Type	Class Origin
ChangeAffectedElementsAssignedSequence	uint32	CIM_Service
RequestStateChange	uint32	CIM_EnabledLogicalElement
StartService	uint32	CIM_Service
StopService	uint32	CIM_Service

Class CIM_StorageRelocationServiceextends CIM_Service

Table of Contents Hierarchy Direct Known Subclasses Class Qualifiers Class Properties Class Methods

Class Hierarchy

Direct Known Subclasses

Class Qualifiers