| Name | Data Type | Default Value | Qualifiers |
| Name | Data Type | Value |
| BankLabel | string | |
| Description | string | A string identifying the physically labeled bank where the Memory is located - for example, 'Bank 0' or 'Bank A'. |
| MappingStrings | string | MIF.DMTF|Memory Device|005.4 |
| MaxLen | uint32 | 64 |
| Capacity | uint64 | |
| Description | string | The total capacity of this PhysicalMemory, in bytes. |
| MappingStrings | string | MIF.DMTF|Memory Device|005.5 |
| Units | string | Bytes |
| DataWidth | uint16 | |
| Description | string | Data width of the PhysicalMemory, in bits. A data width of 0 and a TotalWidth of 8 would indicate that the Memory is solely used to provide error correction bits. |
| MappingStrings | string | MIF.DMTF|Memory Device|005.8 |
| Units | string | Bits |
| FormFactor | uint16 | |
| Description | string | The implementation form factor for the Chip. For example, values such as SIMM (7), TSOP (9) or PGA (10) can be specified. |
| MappingStrings | string | MIF.DMTF|Memory Device|005.6 |
| Override | string | FormFactor |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 |
| Values | string | Unknown, Other, SIP, DIP, ZIP, SOJ, Proprietary, SIMM, DIMM, TSOP, PGA, RIMM, SODIMM, SRIMM, SMD, SSMP, QFP, TQFP, SOIC, LCC, PLCC, BGA, FPBGA, LGA |
| InterleavePosition | uint32 | |
| Description | string | The position of this PhysicalMemory in an interleave. 0 indicates non-interleaved. 1 indicates the first position, 2 the second position and so on. For example, in a 2:1 interleave, a value of '1' would indicate that the Memory is in the 'even' position. |
| MappingStrings | string | MIF.DMTF|Memory Device Mapped Addresses|001.7 |
| MemoryType | uint16 | |
| Description | string | The type of PhysicalMemory. Synchronous DRAM is also known as SDRAM Cache DRAM is also known as CDRAM CDRAM is also known as Cache DRAM SDRAM is also known as Synchronous DRAM BRAM is also known as Block RAM |
| MappingStrings | string | MIF.DMTF|Memory Device|005.9 |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26..32567, 32568..65535 |
| Values | string | Unknown, Other, DRAM, Synchronous DRAM, Cache DRAM, EDO, EDRAM, VRAM, SRAM, RAM, ROM, Flash, EEPROM, FEPROM, EPROM, CDRAM, 3DRAM, SDRAM, SGRAM, RDRAM, DDR, DDR-2, BRAM, FB-DIMM, DDR3, FBD2, DMTF Reserved, Vendor Reserved |
| PositionInRow | uint32 | |
| Description | string | Specifies the position of the PhysicalMemory in a 'row'. For example, if it takes two 8-bit memory devices to form a 16- bit row, then a value of '2'means that this Memory is the second device. 0 is an invalid value for this property. |
| MappingStrings | string | MIF.DMTF|Memory Device Mapped Addresses|001.6 |
| Speed | uint32 | |
| Description | string | The speed of the PhysicalMemory, in nanoseconds. |
| MappingStrings | string | MIF.DMTF|Memory Device|005.24 |
| Units | string | NanoSeconds |
| TotalWidth | uint16 | |
| Description | string | Total width, in bits, of the PhysicalMemory, including check or error correction bits. If there are no error correction bits, the value in this property should match that specified for DataWidth. |
| MappingStrings | string | MIF.DMTF|Memory Device|005.7 |
| Units | string | Bits |