| Name | Data Type | Default Value | Qualifiers |
| Name | Data Type | Value |
| Aggregator | string | |
| Description | string | This specifies the AS and IP address of the router that has generated an aggregate. |
| MappingStrings | string | MIB.IETF|BGP4-MIB.bgp4PathAttrAggregatorAS |
| ASPath | string | |
| Description | string | This attribute is a sequences of the AS numbers through which routing information carried in this UPDATE message has passed. The components of this list can be AS_SETs or AS_SEQUENCEs. |
| MappingStrings | string | MIB.IETF|BGP4-MIB.bgp4PathAttrASPath |
| AsSet | string | |
| Description | string | This is the set of all elements contained in all specific paths that are being summarized, so that those attributes will remain available to the routing decision process. |
| AtomicAggregate | boolean | |
| Description | string | This property is set to TRUE if there are overlapping routes, and a less-specific route is selected instead of a more specific one (e.g., a system propagates an aggregate that causes loss of information). The value is set to FALSE if a less-specific route is NOT selected. |
| MappingStrings | string | MIB.IETF|BGP4-MIB.bgp4PathAttrAtomicAggregate |
| BGPCommunityValue | uint32 | |
| Description | string | This defines a group of destinations that share a similar property. Communities are not restricted to a single AS, and can span multiple ASs. This attribute is used to simplify routing policies by basing policies on a logical value, as opposed to an IP address or an AS number. |
| LocalPreference | uint16 | |
| Description | string | This defines the priority, or preference, of a route, in order to better compare it with other routes for the same destination. Higher values indicate a higher preference for a route. |
| MappingStrings | string | MIB.IETF|BGP4-MIB.bgp4PathAttrLocalPref |
| MED | uint32 | |
| Description | string | This is used on external (e.g., inter-AS) links to indicate which is the preferred entry point into an AS, when that AS has multiple entry points. Lower MED values have preference. |
| MappingStrings | string | MIB.IETF|BGP4-MIB.bgp4PathAttrMultiExitDisc |
| NextHop | string | |
| Description | string | This attribute defines the IP address of the border router that should be used as the next hop to the destinations listed in the UPDATE message. |
| MappingStrings | string | MIB.IETF|BGP4-MIB.bgp4PathAttrNextHop |
| NextHopSelf | string | |
| Description | string | This defines the next hop to be the IP address of the border IBGP neighbor. |
| Origin | uint16 | |
| Description | string | This is generated by the AS that originates the routing information. There are three types of origins - IGP, EGP, and INCOMPLETE. These correspond to whether the information was learned internally in the AS, externally via an EGP, or by some other means. |
| MappingStrings | string | MIB.IETF|BGP4-MIB.bgp4PathAttrOrigin |
| ValueMap | string | 1, 2, 3 |
| Values | string | IGP, EGP, INCOMPLETE |
| OriginatorID | string | |
| Description | string | This is the router ID for the ORIGIN attribute. |
| SystemCreationClassName | string | |
| Description | string | The scoping AutonomousSystem's CreationClassName. |
| Key | boolean | true |
| MaxLen | uint32 | 256 |
| Propagated | string | CIM_AutonomousSystem.CreationClassName |
| SystemName | string | |
| Description | string | The scoping AutonomousSystem's Name. |
| Key | boolean | true |
| MaxLen | uint32 | 256 |
| Propagated | string | CIM_AutonomousSystem.Name |
| Version | string | |
| Description | string | This defines the version of the BGP protocol. |
| Key | boolean | true |