| Name | Data Type | Default Value | Qualifiers |
| Name | Data Type | Value |
| AddressIdentifier | uint32 | |
| Deprecated | string | CIM_FCPort.PermanentAddress |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: An address value that is used to identify the source (S_ID) or destination (D_ID) of a frame. The FC-SW standard includes a table of special address identifier values and their meanings. Consult the FC-SW documentation for additional information. |
| BypassedState | uint16 | |
| Deprecated | string | No value |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: Indication of whether the Port is currently bypassed (value=2) or not (value=1). A value of 3 ("Forced Insert") describes that the Port is forced active, when it would otherwise be "Bypassed". |
| ValueMap | string | 0, 1, 2, 3 |
| Values | string | Unknown, Not Bypassed, Bypassed, Forced Insert |
| ConnectedMedia | uint16 | |
| Deprecated | string | No value |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: The type of cabling as sensed by the Port. Not all Fibre Ports are capable of providing this information. In this case, a value of 0, "Unknown", will be returned. Also, when single or multi-mode fiber cabling cannot be distinguished, the more general value 4, "Fiber-optic" can be specified. |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6 |
| Values | string | Unknown, Other, No Media, Copper/Twinaxial, Fiber-optic, Fiber Single Mode, Fiber Multimode |
| CRCErrors | uint64 | |
| Counter | boolean | true |
| Deprecated | string | CIM_FCPortStatistics.CRCErrors |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: Number of times that the CRC in a frame does not match the CRC computed by the receiver. |
| CurrentPortType | uint16 | |
| Deprecated | string | CIM_FCPort.PortType |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: The specific mode in which the Port is currently running. The value is one of the entries in the EnabledPortTypes array. The current port type or mode is dependent on the fibre technology. For example, in a public loop network, you might indicate a port type of "FL" (value=6) or "NL" (value=2). |
| ModelCorrespondence | string | CIM_FibrePort.EnabledPortTypes, CIM_FibrePort.CurrentVersion |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6, 7 |
| Values | string | Unknown, N, NL-Private, NL-Public, E, F, FL, B |
| CurrentVersion | string | |
| Deprecated | string | No value |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: Version information for the CurrentPortType that is active. |
| ModelCorrespondence | string | CIM_FibrePort.CurrentPortType |
| ElasticityBufferOverruns | uint64 | |
| Counter | boolean | true |
| Deprecated | string | No value |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: The number of times that a fill word could not be deleted, when required. The Elasticity Buffer is defined in FC-AL. This event might cause data corruption and might indicate a configuration error or a device out of spec. |
| ElasticityBufferUnderruns | uint64 | |
| Counter | boolean | true |
| Deprecated | string | No value |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: The number of times that a fill word could not be inserted, when required. The Elasticity Buffer is defined in FC-AL. This event might cause data corruption and might indicate a configuration error or that a device is out of spec. |
| FramesTooLong | uint64 | |
| Counter | boolean | true |
| Deprecated | string | CIM_FCPortStatistics.FramesTooLong |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: The number of frames that were received that were longer than 2140 octets. The value of 2140 is calculated based on an assumption of 24 header bytes plus 4 CRC bytes and 2112 bytes of payload. |
| FramesTooShort | uint64 | |
| Counter | boolean | true |
| Deprecated | string | CIM_FCPortStatistics.FramesTooShort |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: The number of frames that were received that were shorter than 28 octets. The value of 28 is calculated based on an assumption of 24 header bytes plus 4 CRC bytes. The count does not include SOF/EOF bytes that are not data. |
| InvalidTransmissionWords | uint64 | |
| Counter | boolean | true |
| Deprecated | string | CIM_FCPortStatistics.InvalidTransmissionWords |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: The number of transmission words that had an 8b10b code violation in one or more of its characters, had a K28.5 in its second, third, or fourth character positions, or was an ordered set that had an incorrect Beginning Running Disparity. |
| LossOfSignalCounter | uint64 | |
| Counter | boolean | true |
| Deprecated | string | CIM_FCPortStatistics.LossOfSignalCounter |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: Number of times that the signal has been lost on the Port since the last reset of the Device. |
| LossOfSyncCounter | uint64 | |
| Counter | boolean | true |
| Deprecated | string | CIM_FCPortStatistics.LossOfSyncCounter |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: Number of times that synchronization has been lost on the Port since the last reset of the Device. Synchronization is assumed lost after a timeout period that is identified by the Receiver TransmitterTimeout property. |
| ReceiverTransmitterTimeout | uint64 | |
| Deprecated | string | No value |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: Timeout value in milliseconds that is used to determine when loss of synchronization has occurred. The typical default is 100 msec. |
| PUnit | string | second * 10^-3 |
| Units | string | Milliseconds |
| AliasAddresses | uint32[] | |
| Deprecated | string | CIM_FCPort.NetworkAddresses |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: One or more address identifiers that can be recognized by the Port, in addition to its port-specific identifier. Multicast or hunt group addresses that are recognized by the Port would be identified in this array. |
| EnabledPortTypes | uint16[] | |
| Deprecated | string | No value |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: The specific modes currently enabled for the Port. The values are equal to, or a subset of the values in the Supported PortTypes array. |
| ModelCorrespondence | string | CIM_FibrePort.SupportedPortTypes, CIM_FibrePort.EnabledVersions |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6, 7 |
| Values | string | Unknown, N, NL-Private, NL-Public, E, F, FL, B |
| EnabledVersions | string[] | |
| ArrayType | string | Indexed |
| Deprecated | string | No value |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: Version information for each of the EnabledPortTypes. A particular PortType (mode) might be listed multiple times in the EnabledPortTypes array in order to define multiple, unique version levels. Note, each entry of this array is related to the entry in EnabledPortTypes that is located at the same index. |
| ModelCorrespondence | string | CIM_FibrePort.EnabledPortTypes |
| PortTypeVersions | string[] | |
| ArrayType | string | Indexed |
| Deprecated | string | No value |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: Version information for each of the SupportedPortTypes. A particular PortType (mode) can be listed multiple times in the SupportedPortTypes array in order to define multiple, unique version levels. Note, each entry of this array is related to the entry in SupportedPortTypes that is located at the same index. |
| ModelCorrespondence | string | CIM_FibrePort.SupportedPortTypes |
| SupportedPortTypes | uint16[] | |
| ArrayType | string | Indexed |
| Deprecated | string | No value |
| Description | string | Note: The use of this method has been deprecated.
Deprecated description: An array that indicates the modes in which the Port can operate. PortType values describe the role and behavior of the Fibre Channel entity: "N" = Node Port, "NL" = Node Port supporting FC arbitrated loop, "E" = Expansion Port connecting fabric elements (for example, FC switches), "F"=Fabric (element) Port, "FL"=Fabric (element) Port supporting FC arbitrated loop, and "B"=Bridge Port. PortTypes are defined in the ANSI X3 standards.
A particular mode can be listed multiple times in the SupportedPortTypes array in order to define that multiple, unique version levels are supported. Version information is defined in the PortTypeVersions property. Note, each entry of the SupportedPortTypes array is related to the entry in PortTypeVersions that is located at the same index. |
| ModelCorrespondence | string | CIM_FibrePort.PortTypeVersions |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6, 7 |
| Values | string | Unknown, N, NL-Private, NL-Public, E, F, FL, B |