Name | Data Type | Default Value | Qualifiers |
Name | Data Type | Value |
LIDMask | uint8 | |
Description | string | The LID Mask Control value provides a way to have multiple addresses for a single path. The number of LIDs assigned to a port range from 1 to 128 unicast LIDs. The LIDMask can be set to define the LID assignments of the port. |
MappingStrings | string | MAD.IBTA | PortInfo | LMC |
MaxValue | sint64 | 128 |
MinValue | sint64 | 1 |
Write | boolean | true |
LinkSpeedActive | uint8 | |
BitMap | string | 0 |
BitValues | string | 2.5 |
Description | string | Current active link speed. It is a component of the ports actual speed. Actual speed is calculated by the product of LinkSpeedActive times LinkWidthActive. |
MappingStrings | string | MAD.IBTA | PortInfo | LinkSpeedActive |
PUnit | string | bit * 10^9 |
Units | string | GigaBits |
LinkWidthActive | uint16 | |
BitMap | string | 0, 1, 3 |
BitValues | string | 1x, 4x, 12x |
Description | string | Currently active link width. Only one width should be selected. Therefore, the only valid values are 1 (1x), 2 (4x), and 8 (12x). |
MappingStrings | string | MAD.IBTA | PortInfo | LinkWidthActive |
MaxSpeed | uint64 | |
Description | string | The Max speed of the connection is derived from the product of LinkSpeedEnabled and LinkWidthAvailable. |
Override | string | MaxSpeed |
PUnit | string | bit / second |
Units | string | Bits per Second |
PermanentAddress | string | |
Description | string | The GUID of this port. |
MappingStrings | string | MIF.DMTF|Network Adapter 802 Port|001.2 |
MaxLen | uint32 | 64 |
Override | string | PermanentAddress |
PortType | uint16 | |
Description | string | The type of port; e.g. switch, router, channel adapter. |
ModelCorrespondence | string | CIM_NetworkPort.OtherNetworkPortType |
Override | string | PortType |
ValueMap | string | 0, 60, 61, 62, 16000.. |
Values | string | Unknown, Switch, Router, Channel Adapter, Vendor Specific |
Speed | uint64 | |
Description | string | The Speed property is derived from the product of LinkWidthActive and LinkSpeedActive. This is the actual speed of the connection. |
MappingStrings | string | MIB.IETF|MIB-II.ifSpeed, MIF.DMTF|Network Adapter 802 Port|001.5 |
Override | string | Speed |
PUnit | string | bit / second |
Units | string | Bits per Second |
NetworkAddresses | string[] | |
Description | string | The LIDs of this port. The first entry should always contain the base LID. |
MappingStrings | string | MIF.DMTF|Network Adapter 802 Port|001.3 |
MaxLen | uint32 | 64 |
Override | string | NetworkAddresses |