| Name | Data Type | Default Value | Qualifiers |
| Name | Data Type | Value |
| FloodingInterval | uint16 | |
| Description | string | Specifies the time interval in seconds at which traffic engineering information is flooded. Shorter intervals lead to more control overhead, more traffic in the network and more cycles wasted in processing this information at the routers. On the other hand longer intervals, make the route chosen for the tunnels to be less optimal with respect to the state of the network. |
| PUnit | string | second |
| Units | string | Seconds |
| ReoptimizationFreq | uint32 | 3600 |
| Description | string | Path computation may be configured to be more or less reactive to network state. It may be desirable to have different values on different LSRs. Also, certain tunnels may not be re-optimized. This property specifies the re-optimization frequency for the LSR, in seconds. Default is 3600 (1 hour). The maximum interval is 604800 seconds (1 week). A value of 0 disables re- optimization. |
| MaxValue | sint64 | 604800 |
| PUnit | string | second |
| Units | string | Seconds |
| ReoptimizationLinkUp | uint16 | |
| Description | string | This property describes what happens when the MPLSTEService obtains knowledge about a new link coming into operation. The value 'OnLinkUp' (1) denotes that immediately after detecting the new link, a re-optimization step is performed. 'NextTimeInSchedule' (2) waits until the next time a re- optimization needs to take place. The frequency is defined by the ReoptimizationFreq property. And, 'Manual Trigger' (3) means the re-optimization MUST be triggered by manual interaction such as a human operator triggering the re-optimization. |
| ValueMap | string | 0, 1, 2, 3 |
| Values | string | Unknown, OnLinkUp, NextTimeInSchedule, ManualTrigger |