Name | Data Type | Default Value | Qualifiers |
Name | Data Type | Value |
ConnectionType | uint16 | |
Description | string | The supported connection type for this endpoint. The connection type may be needed before the port(s) are associated and also is used in some SCSI commands. |
MappingStrings | string | SPC.INCITS-T10 | Protocol Identifier | Values |
ModelCorrespondence | string | CIM_SCSIProtocolEndpoint.Name, CIM_SCSIProtocolEndpoint.OtherConnectionType |
ValueMap | string | 1, 2, 3, 4, 5, 6, 7, 8, 9 |
Values | string | Other, Fibre Channel, Parallel SCSI, SSA, IEEE 1394, RDMA, iSCSI, SAS, ADT |
Name | string | |
Description | string | The SCSI identifier for the target or initiator device, in the format appropriate for the ConnectionType. If a ConnectionType specific subclass is defined, the subclass may override Name to define the format. For other ConnectionTypes, the format (and content) should match that of PermamnentAddress of the corresponding LogicalPort. |
Key | boolean | true |
MappingStrings | string | SPC.INCITS-T10 |Protocol Specific Parameters | Name |
MaxLen | uint32 | 256 |
ModelCorrespondence | string | CIM_SCSIProtocolEndpoint.ConnectionType, CIM_SCSIProtocolEndpoint.OtherConnectionType |
Override | string | Name |
OtherConnectionType | string | |
Description | string | The connection type, if ConnectionType is "Other". |
ModelCorrespondence | string | CIM_SCSIProtocolEndpoint.Name, CIM_SCSIProtocolEndpoint.ConnectionType |
Role | uint16 | |
Description | string | For iSCSI, each SCSIProtocolEndpoint MUST act as either a target or an initiator endpoint. Other transports allow a SCSI PE to act as both an initiator and target endpoint. This property indicates which role this ProtocolEndpoint implements. |
ValueMap | string | 0, 2, 3, 4 |
Values | string | Unknown, Initiator, Target, Both Initiator and Target |
TargetRelativePortNumber | uint32 | |
Description | string | For ports on a target device, the port number, relative to the storage system. 0 is reserved by T10, 1 is port A, 2 is port B, etc. These numbers are used in SCSI commands that operate on target port groups. |
MappingStrings | string | SPC.INCITS-T10 | RelativeTargetPort | IdentifierFormat |
MinValue | sint64 | 1 |