| Name | Data Type | Default Value | Qualifiers |
| Name | Data Type | Value |
| AccessState | uint16 | |
| Description | string | Access to all associated logical units through all aggregated ports share this access state. Access to the Logical Units through other ports is specified by the access state of those port's target port group. |
| MappingStrings | string | SPC.INCITS-T10 |Asymmetric Access State, MP_API.SNIA|MP_ACCESS_STATE_TYPE |
| ValueMap | string | 2, 3, 4, 5, 6 |
| Values | string | Active/Optimized, Active/Non-optimized, StandBy, Unavailable, Transitioning |
| Asymmetric | boolean | false |
| Description | string | A boolean indicating whether the associated logical unit has asymmetric multipath access. If Asymmetric is true, then there MUST be a SCSITargetPortGroup instance associated to the LogicalDevice. |
| MappingStrings | string | MP_API.SNIA|MP_MULTIPATH_LOGICAL_UNIT_PROPERTIES|asymmetric |
| Write | boolean | true |
| AutoFailbackEnabled | uint16 | 4 |
| Description | string | The auto-failback setting for the associated logical units. Either enabled, disabled, or all associated logical units follow the service-wide setting from the capabilities class associated with the appropriate service. |
| MappingStrings | string | MP_API.SNIA|MP_MULTIPATH_LOGICAL_UNIT_PROPERTIES|autoFailbackEnabled |
| ModelCorrespondence | string | CIM_SCSIMultipathConfigurationCapabilities.AutoFailbackEnabled |
| ValueMap | string | 2, 3, 4 |
| Values | string | Enabled for the associated logical units, Disabled for the associated logical units, The associated logical units use the service-wide setting |
| Write | boolean | true |
| CurrentLoadBalanceType | uint16 | 7 |
| Description | string | The load balance type for the associated logical unit. |
| MappingStrings | string | MP_API.SNIA|MP_MULTIPATH_LOGICAL_UNIT_PROPERTIES|currentLoadBalanceType |
| ModelCorrespondence | string | CIM_SCSIMultipathSettings.OtherCurrentLoadBalanceType |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6, 7 |
| Values | string | Unknown, Other, No Load Balancing, Round Robin, Least Blocks, Least IO, Product Specific, Service Wide Default |
| Write | boolean | true |
| CurrentPollingRate | uint32 | |
| Description | string | The current polling rate (in seconds) for auto-failback. This cannot exceed PollingRateMax. If this property and the service-wide Capabilities instance CurrentPollingRate are non-zero, this value has precedence for the associated logical units. The instrumentation should not instantiate this property if the value from CIM_SCSIMultipathConfigurationCapabilities is used for the associated logical units. |
| MappingStrings | string | MP_API.SNIA|MP_MULTIPATH_LOGICAL_UNIT_PROPERTIES|currentPollingRate |
| ModelCorrespondence | string | CIM_SCSIMultipathConfigurationCapabilities.CurrentPollingRate |
| Write | boolean | true |
| ExplicitFailover | boolean | |
| Description | string | True indicates that the underlying implementation provides an interface allowing drivers to explicitly request activation of a target port group - either through the SCSI SET TARGET PORT GROUP or a proprietary command. |
| MappingStrings | string | MP_API.SNIA|MP_TARGET_PORT_PROPERTIES|explicitFailover |
| Identifier | uint16 | |
| Description | string | An integer identifier for the target port group. This corresponds to the TARGET PORT GROUP field in the REPORT TARGET PORT GROUPS response and the TARGET PORT GROUP field in an INQUIRY VPD page 85 response, type 5h identifier. |
| MappingStrings | string | MP_API.SNIA|MP_TARGET_PORT_PROPERTIES|tpgID, SPC.INCITS-T10 | Target Port Group Descriptor | Target Port Group, SPC.INCITS-T10 | Inquiry VPD page 0x85 | Target Port Group |
| OtherCurrentLoadBalanceType | string | |
| Description | string | A string describing the current load balance algorithm if CurrentLoadBalanceType is 1 ('Other'). This string MUST be identical to one of the strings from CIM_SCSIMultipathConfigurationCapabilities OtherSupportedLoadBalanceAlgorithmNames. |
| MappingStrings | string | MP_API.SNIA|MP_MULTIPATH_LOGICAL_UNIT_PROPERTIES|currentLoadBalanceType |
| ModelCorrespondence | string | CIM_SCSIMultipathConfigurationCapabilities.OtherSupportedLoadBalanceAlgorithmNames, CIM_SCSIMultipathSettings.CurrentLoadBalanceType |
| Write | boolean | true |
| PollingRateMax | uint32 | |
| Description | string | The maximum polling rate (in seconds) supported by the driver if different from the service-wide max from the capabilities instance. Zero (0) indicates the driver either does not poll for autofailback or has not provided an interface to set the polling rate for multipath logical units. If this property and the service PollingRateMax are non-zero, this value has precedence for the associate logical units. The instrumentation should not instantiate this property if the value from CIM_SCSIMultipathConfigurationCapabilities is used for the associated logical units. |
| MappingStrings | string | MP_API.SNIA|MP_MULTIPATH_LOGICAL_UNIT_PROPERTIES|pollingRateMax |
| ModelCorrespondence | string | CIM_SCSIMultipathConfigurationCapabilities.PollingRateMax |
| Write | boolean | true |
| Preferred | boolean | |
| Description | string | True indicates that the target device indicates that access to the associated logical units through the ports in this target port group is preferred over access through other ports. This may correspond to the PREF bit in the SCSI TARGET PORT GROUP descriptor or an equivalent vendor-specific interface. |
| MappingStrings | string | MP_API.SNIA|MP_TARGET_PORT_PROPERTIES|preferredLUPath, SPC.INCITS-T10 | Target Port Group Descriptor | PREF |
| SupportsLuAssignment | boolean | |
| Description | string | True indicates that the underlying implementation provides an interface allowing the administrator to reassign logical units to target port groups. |
| MappingStrings | string | MP_API.SNIA|MP_TARGET_PORT_PROPERTIES|supportsLuAssignment |