| Name | Data Type | Default Value | Qualifiers |
| Name | Data Type | Value |
| CallSetupResultCode | uint16 | |
| Description | string | Current call setup result code. |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 |
| Values | string | No Previous Call, No Dial Tone Detected, Reorder Signal Detected, Network Busy, Busy Signal Detected, No Recognized Signal Detected, Voice Detected, Text Telephone Detected, Data Answering Signal Detected, Data Calling Signal Detected, Fax Answering Signal Detected, Fax Calling Signal Detected, V.8bis Signal Detected |
| CallWaitingEventCount | uint8 | |
| Counter | boolean | true |
| Description | string | Number of Call waiting events detected for the last or current call. |
| CarrierRenegotiationEventCount | uint8 | |
| Counter | boolean | true |
| Description | string | Carrier Rate renegotiation event count for the last or current call. |
| CarrierRetrainsGranted | uint8 | |
| Counter | boolean | true |
| Description | string | The number of carrier retrains granted during the current or last call. |
| CarrierRetrainsRequested | uint8 | |
| Counter | boolean | true |
| Description | string | The number of carrier retrains requested during the current or last call. |
| DTEDCEInterfaceMode | uint16 | |
| Description | string | Current DTE-DCE interface mode of the Unimodem, such as asynchronous, V.80 transparent, or framed synchronous modes. |
| ValueMap | string | 0, 1, 2 |
| Values | string | Async Data, V.80 Transparent Synchronous Mode, V.80 Framed Synchronous Mode |
| ErrorControlFrameSize | uint16 | |
| Description | string | Error Control frame size in bytes for the last or current call. |
| PUnit | string | byte |
| Units | string | Bytes |
| ErrorControlLinkNAKs | uint8 | |
| Counter | boolean | true |
| Description | string | Error control link NAKs received for the last or current call. |
| ErrorControlLinkTimeouts | uint8 | |
| Counter | boolean | true |
| Description | string | Error control link timeouts in transmission for the last or current call. |
| EstimatedNoiseLevel | uint32 | |
| Description | string | Estimated noise level for the last or current call in -dBm. Values are in the range of 0-100. |
| Gauge | boolean | true |
| PUnit | string | decibel(m) * -1 |
| Units | string | -dBm |
| FinalReceiveCarrierDataRate | uint32 | |
| Description | string | Final receive carrier data rate of the current or last call, in bits per second. |
| PUnit | string | bit / second |
| Units | string | Bits per Second |
| FinalTransmitCarrierDataRate | uint32 | |
| Description | string | Final transmit carrier data rate of the current or last call, in bits per second. |
| PUnit | string | bit / second |
| Units | string | Bits per Second |
| InitialReceiveCarrierDataRate | uint32 | |
| Description | string | Initial receive carrier data rate for the current or last call, in bits per second. |
| PUnit | string | bit / second |
| Units | string | Bits per Second |
| InitialTransmitCarrierDataRate | uint32 | |
| Description | string | Initial transmit carrier data rate for the current or last call, in bits per second. |
| PUnit | string | bit / second |
| Units | string | Bits per Second |
| MultiMediaMode | uint16 | |
| Description | string | Current multimedia mode of the Unimodem. |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 |
| Values | string | Data Only, Fax Only, Voice Only, Voice View, ASVD V.61, ASVD V.34Q, DSVD Multi-Tech, DSVD 1.2, DSVD V.70, Video Telephony H.324, Other V.80 Call |
| NormalizedMeanSquaredError | uint32 | |
| Description | string | Normalized mean squared error for the last or current call. |
| ReceiveCarrierNegotiation | uint16 | |
| Description | string | The active receive modulation scheme. |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23..65535 |
| Values | string | V.17 (G3 Fax Call), V.21, V.22, V.22bis, V.23 Constant Carrier (1200/75), V.23 Switched Carrier (Half Duplex), V.26bis, V.26ter, V.27ter (G3 Fax Call), V.29 HD (G3 Fax Call), V.32, V.32bis, V.34, V.34 HD (G3 Fax Call), V.90 Issue 1 (Asymmetric), V.90 Issue 2 (Symmetric), Reserved (V.58), X2, K56FLEX, V.FC, V.32terbo, Bell 212A, Bell 103, Reserved for Mfgs |
| ReceiveCharsLost | uint64 | |
| Counter | boolean | true |
| Description | string | Number of receive characters lost for the last or current call. A DCE might limit this counter to 16 bits, but additional bits can be provided and are accounted for in this property. |
| ReceiveCharsSentToDTE | uint64 | |
| Counter | boolean | true |
| Description | string | Number of receive chars sent to the DTE for the last or current call. A continuous connection might exceed this value, given enough time. Typically these counters are implemented as 32-bit counters, but additional bits can be provided and are accounted for in this property. If these counters hit maximum value, the DCE manufacturer might roll over to 0. |
| ReceivedIFrameErrorCount | uint64 | |
| Counter | boolean | true |
| Description | string | Number of I-Frame errors detected for the last or current call, if error control protocol is running. A DCE might limit this counter to 16 bits, but additional bits can be provided and are accounted for in this property. |
| ReceiveFlowControl | uint16 | |
| Description | string | The flow control mechanism used in receiving data. |
| ValueMap | string | 0, 1, 2, 3 |
| Values | string | Unknown, Off, DC1/DC3, V.24 ckt 106/133 |
| ReceiveIFrameCount | uint64 | |
| Counter | boolean | true |
| Description | string | Number of I-Frames received for the last or current call. A continuous connection might exceed this value, given enough time. Typically these counters are implemented as 32-bit counters, but additional bits can be provided and are accounted for in this property. If these counters hit maximum value, the DCE manufacturer might roll over to 0. |
| TemporaryCarrierLossEventCount | uint8 | |
| Counter | boolean | true |
| Description | string | Temporary carrier loss event count for the last or current call. |
| TerminationCause | uint16 | |
| Description | string | Cause of last call termination. |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50 |
| Values | string | Cause Unidentified, No Previous Call, Call Is Still in Progress, Call Waiting Signal Detected, Delayed, NMS Initiated Dial Call, NMS Initiated Leased Line Restoral, NMS Initiated Redial, NMS Initiated Dial Disconnect, Power Loss, Equipment Failure, Front Panel Disconnect Requested, Front Panel Leased Line Restoral, Automatic Leased Line Restoral, Inactivity Timer Expired, cct116 Restoral Request, cct108 Is Off Inhibits Dial, cct108 Turned Off, No Number Provided, Blacklisted Number, Call Attempts Limit Exceeded, Extension Phone Off Hook, Call Setup Fail Timer Expired, Incoming Call Detected, Loop Current Interrupted, No Dial Tone, Voice Detected, Reorder Tone, Sit Tone, Engaged Tone, Long Space Disconnect, Carrier Lost, Training Failed, No Modulation in Common, Retrain Failed, Retrain Attempt Count Exceeded, GSTN Cleardown Received, Fax Detected, In Test Mode, Intrusive Self Test Initiated, Any Key Abort, DTE Hangup Command, DTE Reset Command, Frame Reject, No Error Control Established, Protocol Violation, n400 Exceeded, Negotiation Failed, Disconnect Frame Received, Sabme Frame Received, Loss Of Synchronization |
| TransmitCarrierNegotiation | uint16 | |
| Description | string | The active transmit modulation scheme. |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23..65535 |
| Values | string | V.17 (G3 Fax Call), V.21, V.22, V.22bis, V.23 Constant Carrier (1200/75), V.23 Switched Carrier (Half Duplex), V.26bis, V.26ter, V.27ter (G3 Fax Call), V.29 HD (G3 Fax Call), V.32, V.32bis, V.34, V.34 HD (G3 Fax Call), V.90 Issue 1 (Asymmetric), V.90 Issue 2 (Symmetric), Reserved (V.58), X2, K56FLEX, V.FC, V.32terbo, Bell 212A, Bell 103, Reserved for Mfgs |
| TransmitCharsLost | uint64 | |
| Counter | boolean | true |
| Description | string | Number of transmit characters lost for the last or current call. A DCE might limit this counter to 16 bits, but additional bits can be provided and are accounted for in this property. |
| TransmitCharsSentFromDTE | uint64 | |
| Counter | boolean | true |
| Description | string | Number of transmit chars sent from the DTE for the last or current call. A continuous connection might exceed this value, given enough time. Typically these counters are implemented as 32-bit counters, but additional bits can be provided and are accounted for in this property. If these counters hit maximum value, the DCE manufacturer might roll over to 0. |
| TransmitFlowControl | uint16 | |
| Description | string | The flow control mechanism used in transmitting data. |
| ValueMap | string | 0, 1, 2, 3 |
| Values | string | Unknown, Off, DC1/DC3, V.24 ckt 106/133 |
| TransmitIFrameCount | uint64 | |
| Counter | boolean | true |
| Description | string | Number of I-Frames transmitted for the last or current call. A continuous connection might exceed this value, given enough time. Typically these counters are implemented as 32- bit counters, but additional bits can be provided and are accounted for in this property. If these counters hit maximum value, the DCE manufacturer might roll over to 0. |
| TransmitIFrameErrorCount | uint64 | |
| Counter | boolean | true |
| Description | string | Number of I-Frame errors detected for the last or current call, if error control protocol is running. A DCE might limit this counter to 16 bits, but additional bits can be provided and are accounted for in this property. |
| UnimodemRevision | string | |
| Description | string | Diagnostic Command Specification, Unimodem revision number. |