| Name | Data Type | Default Value | Qualifiers |
| Name | Data Type | Value |
| DataRedundancyDefault | uint16 | |
| Description | string | DataRedundancyDefault describes the default number of complete copies of data that can be maintained. Examples would be RAID 5 where 1 copy is maintained and RAID 1 where 2 or more copies are maintained. Possible values are 1 to n. The bounds for the redundancy (max and min) are defined by DataRedundancyMax and DataRedundancyMin. |
| MinValue | sint64 | 1 |
| ModelCorrespondence | string | CIM_StorageCapabilities.DataRedundancyMax, CIM_StorageCapabilities.DataRedundancyMin |
| DataRedundancyMax | uint16 | |
| Description | string | DataRedundancyMax describes the maximum number of complete copies of data that can be maintained. Examples would be RAID 5 (where 1 copy is maintained) and RAID 1 (where 2 or more copies are maintained). Possible values are 1 to n. The default redundancy is specified using DataRedundancyDefault, while the minimum is defined by DataRedundancyMin. |
| MinValue | sint64 | 1 |
| ModelCorrespondence | string | CIM_StorageCapabilities.DataRedundancyMin, CIM_StorageCapabilities.DataRedundancyDefault |
| DataRedundancyMin | uint16 | |
| Description | string | DataRedundancyMin describes the minimum number of complete copies of data that can be maintained. Examples would be RAID 5 where 1 copy is maintained and RAID 1 where 2 or more copies are maintained). Possible values are 1 to n. The default redundancy is specified using DataRedundancyDefault, while the maximum is defined by DataRedundancyMax. |
| MinValue | sint64 | 1 |
| ModelCorrespondence | string | CIM_StorageCapabilities.DataRedundancyMax, CIM_StorageCapabilities.DataRedundancyDefault |
| DeltaReservationDefault | uint16 | |
| Description | string | Delta reservation is a number between 1 (1%) and a 100 (100%) that specifies how much space should be reserved by default in a replica for caching changes. For a complete copy this would be 100%, but it can be lower in some implementations. This parameter sets the default value, while DeletaReservationMax and DeltReservationMin set the upper and lower bounds. |
| MaxValue | sint64 | 100 |
| MinValue | sint64 | 0 |
| ModelCorrespondence | string | CIM_StorageCapabilities.DeltaReservationMax, CIM_StorageCapabilities.DeltaReservationMin |
| PUnit | string | percent |
| Units | string | Percentage |
| DeltaReservationMax | uint16 | |
| Description | string | DeltaReservatioMax is a number between 1 (1%) and a 100 (100%) that specifies the maximum amount of space reserved in a replica for caching changes. For a complete copy this would be 100%, but it can be lower in some implementations. This parameter sets the upper limit, while DeltaReservationMin sets the lower limit. |
| MaxValue | sint64 | 100 |
| MinValue | sint64 | 0 |
| ModelCorrespondence | string | CIM_StorageCapabilities.DeltaReservationMin, CIM_StorageCapabilities.DeltaReservationDefault |
| PUnit | string | percent |
| Units | string | Percentage |
| DeltaReservationMin | uint16 | |
| Description | string | DeltaReservationMin is a number between 1 (1%) and a 100 (100%) that specifies the minimum amount of space that should be reserved in a replica for caching changes. For a complete copy this would be 100%, but it can be lower in some implementations. This parameter sets the lower limit, while DeltaReservationMax sets the upper limit. |
| MaxValue | sint64 | 100 |
| MinValue | sint64 | 0 |
| ModelCorrespondence | string | CIM_StorageCapabilities.DeltaReservationMax, CIM_StorageCapabilities.DeltaReservationDefault |
| PUnit | string | percent |
| Units | string | Percentage |
| ElementType | uint16 | |
| Description | string | Enumeration indicating the type of element to which this StorageCapabilities applies. |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6, 7, 8 |
| Values | string | Unknown, Reserved, Any Type, StorageVolume, StorageExtent, StoragePool, StorageConfigurationService, LogicalDisk, StorageTier |
| Encryption | uint16 | |
| Description | string | This property reflects support of the encryption feature implemented by some disk drives. |
| ValueMap | string | 0, 1, 2 |
| Values | string | Unknown, Not Supported, Supported |
| ExtentStripeLengthDefault | uint16 | |
| Description | string | Extent Stripe Length describes the number of underlying StorageExtents across which data is striped in the common striping-based storage organizations. This is also known as the number of 'members' or 'columns'.
A NULL value for ExtentStripeLengthDefault indicates that the system does not support configuration of storage by specifying Stripe Length.
If Extent Stripe Length is supported, and this Capabilities instance is associated with a pool that was created with a range of QOS then ExtentStripeLengthDefault represents the default value. Other available values(such as min, max, and discrete values) can be determined by using the 'GetSupportedStripeLengths' and 'GetSupportedStripeLengthRange' methods.
If Extent Stripe Length is supported and the pool was created with a single specific QOS, representing a Raid group, set, or rank, then this property represents the current/fixed value for the pool, and Extent Stripe Length is not supported in subsequent creation of elements from this pool. Consequently, the 'GetSupportedStripeLength' methods cannot be used, and in a StorageSetting instance used as a goal when creating or modifying a child element of the pool, ExtentStripeLengthGoal, ExtentStripeLengthMin, and ExtentStripeLengthMax MUST be set to NULL. |
| MinValue | sint64 | 1 |
| NoSinglePointOfFailure | boolean | |
| Description | string | Indicates whether or not the associated element supports no single point of failure. Values are: FALSE = does not support no single point of failure, and TRUE = supports no single point of failure. |
| ModelCorrespondence | string | CIM_StorageCapabilities.NoSinglePointOfFailureDefault |
| NoSinglePointOfFailureDefault | boolean | |
| Description | string | Indicates the default value for the NoSinglePointOfFailure property. |
| ModelCorrespondence | string | CIM_StorageCapabilities.NoSinglePointOfFailure |
| PackageRedundancyDefault | uint16 | |
| Description | string | PackageRedundancyDefault describes the default number of redundant packages that will be used. For example, in the storage domain, package redundancy describes how many disk spindles can fail without data loss including, at most, one spare. An example would be RAID5 with a spare disk which would have a PackageRedundancy of 2. Possible values are 0 to n. The bounds for redundancy are specified using the properties, PackageRedundancyMax and PackageRedundancyMin. |
| ModelCorrespondence | string | CIM_StorageCapabilities.PackageRedundancyMin, CIM_StorageCapabilities.PackageRedundancyMax |
| PackageRedundancyMax | uint16 | |
| Description | string | PackageRedundancyMax describes the maximum number of redundant packages that can be used. For example, in the storage domain, package redundancy describes how many disk spindles can fail without data loss including, at most, one spare. An example would be RAID5 with a spare disk which would have a PackageRedundancy of 2. Possible values are 0 to n. The default redundancy is specified using PackageRedundancyDefault, while the maximum is defined by PackageRedundancyMax. |
| ModelCorrespondence | string | CIM_StorageCapabilities.PackageRedundancyMin, CIM_StorageCapabilities.PackageRedundancyDefault |
| PackageRedundancyMin | uint16 | |
| Description | string | PackageRedundancyMin describes the minimum number of redundant packages that can be used. For example, in the storage domain, package redundancy describes how many disk spindles can fail without data loss including, at most, one spare. An example would be RAID5 with a spare disk which would have a PackageRedundancy of 2. Possible values are 0 to n. The default redundancy is specified using PackageRedundancyDefault, while the minimum is defined by PackageRedundancyMin. |
| ModelCorrespondence | string | CIM_StorageCapabilities.PackageRedundancyMax, CIM_StorageCapabilities.PackageRedundancyDefault |
| ParityLayoutDefault | uint16 | |
| Description | string | ParityLayout specifies whether a parity-based storage organization is using rotated or non-rotated parity. If this capabilities instance is associated with a pool that was created with a range of QOS then ParityLayoutDefault represents the default value. Other available values can be determined by using the 'GetSupportedParityLayouts' method. If the pool was created with a single specific QOS, representing a Raid group, set, or rank, then this property represents the current/fixed value for the pool, and ParityLayout is not supported in subsequent creation of elements from this pool. Consequently, the 'GetSupportedParityLayouts' method cannot be used, and the ParityLayoutGoal property in StorageSetting instances used in child element operations on this pool MUST be set to NULL. A NULL value for ParityLayoutDefault indicates that the system does not support configuration of storage by specifying ParityLayout. |
| ValueMap | string | 2, 3 |
| Values | string | Non-Rotated Parity, Rotated Parity |
| UserDataStripeDepthDefault | uint64 | |
| Description | string | User Data Stripe Depth describes the number of bytes forming a strip in common striping-based storage organizations. The strip is defined as the size of the portion of a stripe that lies on one extent. Thus, ExtentStripeLength * UserDataStripeDepth will yield the size of one stripe of user data. A NULL value for UserDataStripeDepthDefault indicates that the system does not support configuration of storage by specifying Stripe Depth.
If User Data Stripe Depth is supported, and this Capabilities instance is associated with a pool that was created with a range of QOS then UserDataStripeDepthDefault represents the default value. Other available values(such as min, max, and discrete values) can be determined by using the 'GetSupportedStripeDepths' and 'GetSupportedStripeDepthRange' methods.
If User Data Stripe Depth is supported and the pool was created with a single specific QOS, representing a Raid group, set, or rank, then this property represents the current/fixed value for the pool, and User Data Stripe Depth is not supported in subsequent creation of elements from this pool. Consequently, the 'GetSupportedStripeDepth' methods cannot be used, and in a StorageSetting instance used as a goal when creating or modifying a child element of the pool, UserDataStripeDepthGoal, UserDataStripeDepthMin, and UserDataStripeDepthMax MUST be set to NULL. |
| MinValue | sint64 | 1 |
| PUnit | string | byte |
| Units | string | Bytes |
| AvailableDiskType | uint16[] | |
| Description | string | Enumeration indicating the type of DiskDrives which may be available. |
| ValueMap | string | 0, 1, 2, 3, 4 |
| Values | string | Unknown, Other, Hard Disk Drive, Solid State Drive, Hybrid |
| AvailableFormFactorType | uint16[] | |
| Description | string | Enumeration indicating the types of disk form factors which may be available. |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6 |
| Values | string | Unknown, Other, Not Reported, 5.25 inch, 3.5 inch, 2.5 inch, 1.8 inch |
| AvailableInterconnectSpeed | uint64[] | |
| Description | string | The speed of disk interfaces which are be available. Values are in bits/second. |
| PUnit | string | bit / second |
| AvailableInterconnectType | uint16[] | |
| Description | string | Enumeration indicating the type of disk interfaces which may be available. |
| ValueMap | string | 0, 1, 2, 3, 4, 5, 6 |
| Values | string | Unknown, other, SAS, SATA, SAS/SATA, FC, SOP |
| AvailableRPM | uint32[] | |
| Description | string | The rotational speed of disk media which are be available. Values are in revolutions per minute. SSD devices shall report 0. |
| PUnit | string | revolution / minute |
| SupportedCompressionRates | uint16[] | |
| Description | string | The SupportedCompressionRates identifies the compression rates that are supported by the implementation, including "None". If "None" is specified, then no other rate may be identified. |
| ValueMap | string | 1, 2, 3, 4, 5, .., 32768..65535 |
| Values | string | None, High, Medium, Low, Implementation Decides, DMTF Reserved, Vendor Specific |
| SupportedDataOrganizations | uint16[] | |
| Description | string | Types of volume data organizations supported. |
| ValueMap | string | 0, 1, 2, 3, 4 |
| Values | string | Other, Unknown, Fixed Block, Variable Block, Count Key Data |